[U-Boot] [RFC] m68k: generic board

[Tom Rini <trini@ti.com>]

On Thu, Jan 15, 2015 at 04:08:40PM +0100, Angelo Dureghello wrote:
> Dear all,
> 
> i would like to post a patch with the m68k generic board
> support, tested and working here, but of course not tested
> for all the other m68k boards except mine.
> 
> My coldfire board is the "amcore" board not yet accepted.
> 
> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/193661
> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/193660
> 
> I need some suggestions on how to proceed now.
> 
> I already modified my board config to work with generic board
> support.
> 
> So my thought is to post 2 separate patches:
> 1
> - add generic board (1/1). Each board maintainer should then
> test it and report for feedbacks.
> 2
> Re-post a 2/2 patch (v8) of amcore using generic board:
> - amcore board (1),
> - mcf5307 support (2),
> 
> This amcore board is the coldfire base i use here for all the
> general m68k tests.
> 
> With your help commenting on this patch until it is conformant
> to the last recent coding guidelines could help me and Alison
> to know what has to be purged / changed, (eventually, if needed)
> in all other m68k boards code.
> 
> What do you think ?

Lets go with #2 and we'll purge the rest of the boards that you don't
want to convert and compile test after -rc1.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150123/a5c94a8f/attachment.pgp>