From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Sun, 15 Feb 2015 15:43:30 +0100
Subject: [U-Boot] [PATCH 2/2] net: phy: Add ability to program the
	ksz9031 skew values from the uboot env
In-Reply-To: <54DE29DB.1010404@denx.de>
References: <1423493073-9462-1-git-send-email-vbridger@opensource.altera.com>
 <1423844367797.57255@opensource.altera.com> <54DE29DB.1010404@denx.de>
Message-ID: <201502151543.30642.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Friday, February 13, 2015 at 05:44:11 PM, Stefan Roese wrote:
> Hi Vince,
> 
> On 13.02.2015 17:19, Vince Bridgers wrote:
> > ....
> > 
> >> No. But with your comments above (which make total sense), I tend to NAK
> >> this ability to configure the PHY skew timings via environment
> >> variables.
> > 
> > Understood, I'll focus on the devicetree implementation and a README to
> > 
>  > help non-expert users use the MII command for board bringup & debug
>  > purposes.
> 
> This README is a good idea and will be helpful. Thanks for doing this.

Hi!

Thank you for doing this indeed :)

Best regards,
Marek Vasut