[U-Boot] [u-boot 01/40] ARM: DRA7: Enable clocks for USB OTGSS and USB PHY

[Lukasz Majewski <l.majewski@samsung.com>]

Hi Kishon,

> Enabled clocks for dwc3 controller and USB PHY present in DRA7.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  arch/arm/cpu/armv7/omap5/hw_data.c   |   14 ++++++++++++++
>  arch/arm/cpu/armv7/omap5/prcm-regs.c |   10 +++++-----
>  arch/arm/include/asm/omap_common.h   |    4 ++--
>  3 files changed, 21 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c
> b/arch/arm/cpu/armv7/omap5/hw_data.c index 95f1686..9315bce 100644
> --- a/arch/arm/cpu/armv7/omap5/hw_data.c
> +++ b/arch/arm/cpu/armv7/omap5/hw_data.c
> @@ -455,6 +455,10 @@ void enable_basic_clocks(void)
>  		(*prcm)->cm_l4per_gpio6_clkctrl,
>  		(*prcm)->cm_l4per_gpio7_clkctrl,
>  		(*prcm)->cm_l4per_gpio8_clkctrl,
> +#ifdef CONFIG_USB_DWC3
> +		(*prcm)->cm_l3init_ocp2scp1_clkctrl,
> +		(*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
> +#endif
>  		0
>  	};
>  
> @@ -486,6 +490,16 @@ void enable_basic_clocks(void)
>  	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
>  			HSMMC_CLKCTRL_CLKSEL_MASK);
>  
> +#ifdef CONFIG_USB_DWC3
> +	/* Enable 960 MHz clock for dwc3 */
> +	setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
> +		     OPTFCLKEN_REFCLK960M);
> +
> +	/* Enable 32 KHz clock for dwc3 */
> +	setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
> +		     USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
> +#endif
> +
>  	/* Set the correct clock dividers for mmc */
>  	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
>  			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
> diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c
> b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 0745d42..440bb40 100644
> --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
> +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
> @@ -575,7 +575,7 @@ struct prcm_regs const omap5_es2_prcm = {
>  	.cm_div_m2_dpll_unipro = 0x4a0081d0,
>  	.cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8,
>  	.cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec,
> -	.cm_coreaon_usb_phy_core_clkctrl = 0x4A008640,
> +	.cm_coreaon_usb_phy1_core_clkctrl = 0x4A008640,
>  	.cm_coreaon_bandgap_clkctrl = 0x4a008648,
>  	.cm_coreaon_io_srcomp_clkctrl = 0x4a008650,
>  
> @@ -709,7 +709,7 @@ struct prcm_regs const omap5_es2_prcm = {
>  	.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
>  	.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
>  	.cm_l3init_ocp2scp3_clkctrl = 0x4a0096e8,
> -	.cm_l3init_usb_otg_ss_clkctrl = 0x4a0096f0,
> +	.cm_l3init_usb_otg_ss1_clkctrl = 0x4a0096f0,
>  
>  	/* prm irqstatus regs */
>  	.prm_irqstatus_mpu_2 = 0x4ae06014,
> @@ -801,8 +801,8 @@ struct prcm_regs const dra7xx_prcm = {
>  	.cm_clkmode_dpll_dsp			= 0x4a005234,
>  	.cm_shadow_freq_config1			= 0x4a005260,
>  	.cm_clkmode_dpll_gmac			= 0x4a0052a8,
> -	.cm_coreaon_usb_phy_core_clkctrl	= 0x4a008640,
> -	.cm_coreaon_usb_phy2_core_clkctrl = 0x4a008688,
> +	.cm_coreaon_usb_phy1_core_clkctrl	= 0x4a008640,
> +	.cm_coreaon_usb_phy2_core_clkctrl	= 0x4a008688,
>  
>  	/* cm1.mpu */
>  	.cm_mpu_mpu_clkctrl			= 0x4a005320,
> @@ -908,7 +908,7 @@ struct prcm_regs const dra7xx_prcm = {
>  	.cm_gmac_gmac_clkctrl			= 0x4a0093d0,
>  	.cm_l3init_ocp2scp1_clkctrl		= 0x4a0093e0,
>  	.cm_l3init_ocp2scp3_clkctrl		= 0x4a0093e8,
> -	.cm_l3init_usb_otg_ss_clkctrl		= 0x4a0093f0,
> +	.cm_l3init_usb_otg_ss1_clkctrl		= 0x4a0093f0,
>  
>  	/* cm2.l4per */
>  	.cm_l4per_clkstctrl			= 0x4a009700,
> diff --git a/arch/arm/include/asm/omap_common.h
> b/arch/arm/include/asm/omap_common.h index 323952f..bd43099 100644
> --- a/arch/arm/include/asm/omap_common.h
> +++ b/arch/arm/include/asm/omap_common.h
> @@ -143,7 +143,7 @@ struct prcm_regs {
>  	u32 cm_div_m2_dpll_unipro;
>  	u32 cm_ssc_deltamstep_dpll_unipro;
>  	u32 cm_ssc_modfreqdiv_dpll_unipro;
> -	u32 cm_coreaon_usb_phy_core_clkctrl;
> +	u32 cm_coreaon_usb_phy1_core_clkctrl;
>  	u32 cm_coreaon_usb_phy2_core_clkctrl;
>  
>  	/* cm2.core */
> @@ -230,7 +230,7 @@ struct prcm_regs {
>  	u32 cm_l3init_fsusb_clkctrl;
>  	u32 cm_l3init_ocp2scp1_clkctrl;
>  	u32 cm_l3init_ocp2scp3_clkctrl;
> -	u32 cm_l3init_usb_otg_ss_clkctrl;
> +	u32 cm_l3init_usb_otg_ss1_clkctrl;
>  
>  	u32 prm_irqstatus_mpu_2;
>  

Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group