[U-Boot] [u-boot 37/40] include: configs: Enable DWC3 and DFU in DRA7xx

[Lukasz Majewski <l.majewski@samsung.com>]

Hi Kishon,

> Enabled dwc3, dwc3-omap and PHY for dwc3 are enabled. Also enabled
> support for DFU.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  include/configs/dra7xx_evm.h      |   63
> +++++++++++++++++++++++++++++++++++++
> include/configs/ti_omap5_common.h |    5 +++ 2 files changed, 68
> insertions(+)
> 
> diff --git a/include/configs/dra7xx_evm.h
> b/include/configs/dra7xx_evm.h index 174a711..75b55d9 100644
> --- a/include/configs/dra7xx_evm.h
> +++ b/include/configs/dra7xx_evm.h
> @@ -43,6 +43,47 @@
>  	"uuid_disk=${uuid_gpt_disk};" \
>  	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
>  
> +#define DFU_ALT_INFO_MMC \
> +	"dfu_alt_info_mmc=" \
> +	"boot part 0 1;" \
> +	"rootfs part 0 2;" \
> +	"MLO fat 0 1;" \
> +	"MLO.raw raw 0x100 0x100;" \
> +	"u-boot.img.raw raw 0x300 0x400;" \
> +	"spl-os-args.raw raw 0x80 0x80;" \
> +	"spl-os-image.raw raw 0x900 0x2000;" \
> +	"spl-os-args fat 0 1;" \
> +	"spl-os-image fat 0 1;" \
> +	"u-boot.img fat 0 1;" \
> +	"uEnv.txt fat 0 1\0"
> +
> +#define DFU_ALT_INFO_EMMC \
> +	"dfu_alt_info_emmc=" \
> +	"rawemmc raw 0 3751936;" \
> +	"boot part 1 1;" \
> +	"rootfs part 1 2;" \
> +	"MLO fat 1 1;" \
> +	"MLO.raw raw 0x100 0x100;" \
> +	"u-boot.img.raw raw 0x300 0x400;" \
> +	"spl-os-args.raw raw 0x80 0x80;" \
> +	"spl-os-image.raw raw 0x900 0x2000;" \
> +	"spl-os-args fat 1 1;" \
> +	"spl-os-image fat 1 1;" \
> +	"u-boot.img fat 1 1;" \
> +	"uEnv.txt fat 1 1\0"
> +
> +#define DFU_ALT_INFO_RAM \
> +	"dfu_alt_info_ram=" \
> +	"kernel ram 0x80200000 0x4000000;" \
> +	"fdt ram 0x80f80000 0x80000;" \
> +	"ramdisk ram 0x81000000 0x4000000\0"
> +
> +#define DFUARGS \
> +	"dfu_bufsiz=0x10000\0" \
> +	DFU_ALT_INFO_MMC \
> +	DFU_ALT_INFO_EMMC \
> +	DFU_ALT_INFO_RAM
> +
>  #include <configs/ti_omap5_common.h>
>  
>  /* Enhance our eMMC support / experience. */
> @@ -132,6 +173,28 @@
>  #define CONFIG_OMAP_USB_PHY
>  #define CONFIG_OMAP_USB2PHY2_HOST
>  
> +/* USB GADGET */
> +#define CONFIG_USB_DWC3_PHY_OMAP
> +#define CONFIG_USB_DWC3_OMAP
> +#define CONFIG_USB_DWC3
> +#define CONFIG_USB_DWC3_GADGET
> +
> +#define CONFIG_USB_GADGET
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0403
> +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
> +#define CONFIG_USB_GADGET_DUALSPEED
> +
> +/* USB Device Firmware Update support */
> +#define CONFIG_DFU_FUNCTION
> +#define CONFIG_DFU_RAM
> +#define CONFIG_CMD_DFU
> +
> +#define CONFIG_DFU_MMC
> +#define CONFIG_DFU_RAM
> +
>  /* SATA */
>  #define CONFIG_BOARD_LATE_INIT
>  #define CONFIG_CMD_SCSI
> diff --git a/include/configs/ti_omap5_common.h
> b/include/configs/ti_omap5_common.h index c47651d..cdc539c 100644
> --- a/include/configs/ti_omap5_common.h
> +++ b/include/configs/ti_omap5_common.h
> @@ -65,6 +65,10 @@
>  #define PARTS_DEFAULT
>  #endif
>  
> +#ifndef DFUARGS
> +#define DFUARGS
> +#endif
> +
>  #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>  	DEFAULT_LINUX_BOOT_ENV \
> @@ -122,6 +126,7 @@
>  		"if test $fdtfile = undefined; then " \
>  			"echo WARNING: Could not determine device
> tree to use; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr}
> ${bootdir}/${fdtfile};\0" \
> +	DFUARGS \
>  
>  #define CONFIG_BOOTCOMMAND \
>  	"run findfdt; " \

Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group