From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Wed, 25 Feb 2015 13:11:45 +0100
Subject: [U-Boot] UMS on mx6sl
In-Reply-To: <CAOMZO5DGfJDJ5nQHX_1pQjhu2soavP2m5-OP0JDLHX6vtdfB-A@mail.gmail.com>
References: <CAOMZO5DEfWVAM7ncu81rf2qGMvacfdgVV_dFx4hFp53pxLgXgQ@mail.gmail.com>
 <CAOMZO5DPYNw6phdjkBZxVUxmJkLZ7HXqe-BHaG3A2t+PvnwS7w@mail.gmail.com>
 <CAOMZO5DGfJDJ5nQHX_1pQjhu2soavP2m5-OP0JDLHX6vtdfB-A@mail.gmail.com>
Message-ID: <201502251311.45973.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday, February 25, 2015 at 03:23:13 AM, Fabio Estevam wrote:
> On Tue, Feb 24, 2015 at 8:19 PM, Fabio Estevam <festevam@gmail.com> wrote:
> > Hi Eric,
> > 
> > On Tue, Feb 24, 2015 at 8:10 PM, Eric Nelson
> > 
> > <eric.nelson@boundarydevices.com> wrote:
> >> You might want to check this value:
> >> 
> >> #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
> > 
> > Thanks for the suggestion. After adding this config the error is still
> > the same:
> > 
> > => ums 0 mmc 1
> > UMS: disk start sector: 0x0, count: 0x762c00
> > g_dnl_register: failed!, error: -19
> > ERROR: g_dnl_register failed
> > at common/cmd_usb_mass_storage.c:107/do_usb_mass_storage()
> 
> Ok, I managed to fix it. Will send a patch tomorrow, thanks

Cool, thanks :)

Best regards,
Marek Vasut