From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements
Date: Thu, 26 Feb 2015 18:14:25 +0200 [thread overview]
Message-ID: <20150226181425.691fb31f@i7> (raw)
In-Reply-To: <CAGo_u6pNfSFxar42N0jeL6uM_=Ea-83UU_vLWE3BLq-nrJX8vQ@mail.gmail.com>
On Thu, 26 Feb 2015 08:50:09 -0600
Nishanth Menon <nm@ti.com> wrote:
> On Thu, Feb 26, 2015 at 1:40 AM, Siarhei Siamashka
> <siarhei.siamashka@gmail.com> wrote:
> > On Wed, 25 Feb 2015 14:55:08 -0600
> > Nishanth Menon <nm@ti.com> wrote:
> >
> >> Hi,
> >>
> >> The third incarnation of this series to address various ideas of
> >> previous V2 series. I will skip the full blurb and point to V1/V2
> >> links for the usual blurb.
> >>
> >> Changes since V2:
> >> - Added documentation revisioning info with ARM erratums
> >> - patch series are split up to address ARM erratums first followed by TI
> >> OMAP conversion
> >> - More OMAP3 now get erratum implementation - had to redo rx51 a little
> >> - I think is better helps exynos: https://patchwork.ozlabs.org/patch/443271/
> >> https://patchwork.ozlabs.org/patch/441863/
> >> - Rearranged the series to address generic ARM first followed by rest.
> >>
> >> V2: http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/213060
> >> V1: http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/212174
> >>
> >> Nishanth Menon (10):
> >> ARM: Introduce erratum workaround for 798870
> >> ARM: Introduce erratum workaround for 454179
> >> ARM: Introduce erratum workaround for 430973
> >> ARM: Introduce erratum workaround for 621766
> >> ARM: OMAP: Change set_pl310_ctrl_reg to be generic
> >> ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs
> >> ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with
> >> omap_smc1
> >> ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended
> >> configuration
> >> ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
> >> ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973,
> >> 621766
> >>
> >> Praveen Rao (1):
> >> ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870
> >
> > Could you perhaps also pick up a workaround for "725233: PLD
> > instructions executed with PLD data forwarding enabled can result
> > in a processor deadlock" for old OMAP3 (r1pX revision of Cortex-A8)?
> >
> > http://git.denx.de/?p=u-boot.git;a=commitdiff;h=041d42e789aba20296ffcde92173f100a9592880
> >
> > This used to be in U-Boot earlier, but seems to have vanished from the
> > current U-Boot code. I would probably submit a patch myself, but I
> > don't have such hardware anymore to test it.
>
> Could I have a review by - I think I screwed up r1-r3 handling in
> start.S when multiple erratas are enabled - which by some luck, I
> have'nt hit.. I should probably fix that.
Sadly, I don't have this old hardware anymore. I have lent my first
generation beagleboard to another person several years ago and have no
idea where it is now. Maybe I should try to get it back one day :)
But taking the "formal" route, I checked who is the current beagleboard
maintainer and looks like that's Tom Rini, who is already quite
conveniently in the CC ;-)
Basically, this old hardware is either maintained or not. If it is
maintained, then probably the board maintainer is the best person to
review and test the errata patches.
> I will hold off adding more erratas or changes for now and look for
> the current series getting in.. in fact, I am tempted to remove omap3
> entirely from this list for now, given the multiple platforms impacted
> and unless folks are willing to help test those, I am more than happy
> to just focus on a15 erratum in the first series which benefits my
> immediate needs and potentially helping exynos as well.
--
Best regards,
Siarhei Siamashka
next prev parent reply other threads:[~2015-02-26 16:14 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-25 20:55 [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 01/11] ARM: Introduce erratum workaround for 798870 Nishanth Menon
2015-03-03 16:29 ` Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 02/11] ARM: Introduce erratum workaround for 454179 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 03/11] ARM: Introduce erratum workaround for 430973 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 04/11] ARM: Introduce erratum workaround for 621766 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 05/11] ARM: OMAP: Change set_pl310_ctrl_reg to be generic Nishanth Menon
2015-03-03 17:08 ` Tom Rini
2015-03-03 17:12 ` Nishanth Menon
2015-03-03 17:54 ` Nishanth Menon
2015-03-03 17:55 ` Tom Rini
2015-02-25 20:55 ` [U-Boot] [PATCH V3 06/11] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 07/11] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 08/11] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 09/11] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 10/11] ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 11/11] ARM: OMAP3: rx51: " Nishanth Menon
2015-02-26 7:40 ` [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Siarhei Siamashka
2015-02-26 14:50 ` Nishanth Menon
2015-02-26 16:14 ` Siarhei Siamashka [this message]
2015-03-02 21:16 ` Tom Rini
2015-03-03 6:45 ` Siarhei Siamashka
2015-03-03 16:25 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150226181425.691fb31f@i7 \
--to=siarhei.siamashka@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox