[U-Boot] Regarding USB device testing in U-boot release

[Marek Vasut <marex@denx.de>]

On Wednesday, February 25, 2015 at 05:51:38 AM, Ramneek Mehresh wrote:
> Hi Marek,
> 
> Thanks for the reply.
> 
> Yes, we are seeing USB 3.0 pen drives from different vendors taking
> different times to give connect-change on latest u-boot. Out of all, HP
> pen drive is taking most of the time.

Is this even a bug ? Are you capable of debugging this ? Maybe it's just a 
crappy drive .

> Would it be possible for you to send the list of devices that you normally
> test? We just want to cross-verify if any of the same device tested on out
> platform is not giving any issue.

I don't think there's any point in my enumerating random flashes I have here.
Instead, please report possible misbehavior in case you stumble upon one. At
best, with a patch attached even.

And please do not top-post .

> Thanks and Regards,
> Ramneek
> 
> > -----Original Message-----
> > From: Marek Vasut [mailto:marex at denx.de]
> > Sent: Tuesday, February 24, 2015 11:09 PM
> > To: Mehresh Ramneek-B31383
> > Cc: u-boot at lists.denx.de
> > Subject: Re: Regarding USB device testing in U-boot release
> > 
> > On Tuesday, February 24, 2015 at 06:59:40 AM, Ramneek Mehresh wrote:
> > > Hi Marex,
> > 
> > Hi,
> > 
> > please keep the list on CC (fixed).
> > 
> > > Could you please confirm if some USB devices are tested before each
> > > U-boot release by Denx? If yes, then I would request you to please
> > > share the list of these devices?
> > 
> > I do my testing with a couple of USB 2.0/USB 3.0 sticks on Altera SoCFPGA
> > Cyclone V and newly also Arria V. I also do some testing on iMX28, 53 and
> > 6 platforms from Freescale. The rest of the testing is up to the
> > community. In my experience, in case there's a regression in the USB
> > stack, someone starts complaining about it sooner rather than later.
> > 
> > Do you have any particular device which is broken ?
> > 
> > Best regards,
> > Marek Vasut

Best regards,
Marek Vasut