U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements
Date: Mon, 2 Mar 2015 16:16:08 -0500	[thread overview]
Message-ID: <20150302211608.GC25373@bill-the-cat> (raw)
In-Reply-To: <20150226181425.691fb31f@i7>

On Thu, Feb 26, 2015 at 06:14:25PM +0200, Siarhei Siamashka wrote:
> On Thu, 26 Feb 2015 08:50:09 -0600
> Nishanth Menon <nm@ti.com> wrote:
> 
> > On Thu, Feb 26, 2015 at 1:40 AM, Siarhei Siamashka
> > <siarhei.siamashka@gmail.com> wrote:
> > > On Wed, 25 Feb 2015 14:55:08 -0600
> > > Nishanth Menon <nm@ti.com> wrote:
> > >
> > >> Hi,
> > >>
> > >> The third incarnation of this series to address various ideas of
> > >> previous V2 series. I will skip the full blurb and point to V1/V2
> > >> links for the usual blurb.
> > >>
> > >> Changes since V2:
> > >>       - Added documentation revisioning info with ARM erratums
> > >>       - patch series are split up to address ARM erratums first followed by TI
> > >>         OMAP conversion
> > >>       - More OMAP3 now get erratum implementation - had to redo rx51 a little
> > >>       - I think is better helps exynos: https://patchwork.ozlabs.org/patch/443271/
> > >>                       https://patchwork.ozlabs.org/patch/441863/
> > >>       - Rearranged the series to address generic ARM first followed by rest.
> > >>
> > >> V2: http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/213060
> > >> V1: http://comments.gmane.org/gmane.comp.boot-loaders.u-boot/212174
> > >>
> > >> Nishanth Menon (10):
> > >>   ARM: Introduce erratum workaround for 798870
> > >>   ARM: Introduce erratum workaround for 454179
> > >>   ARM: Introduce erratum workaround for 430973
> > >>   ARM: Introduce erratum workaround for 621766
> > >>   ARM: OMAP: Change set_pl310_ctrl_reg to be generic
> > >>   ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs
> > >>   ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with
> > >>     omap_smc1
> > >>   ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended
> > >>     configuration
> > >>   ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
> > >>   ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973,
> > >>     621766
> > >>
> > >> Praveen Rao (1):
> > >>   ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870
> > >
> > > Could you perhaps also pick up a workaround for "725233: PLD
> > > instructions executed with PLD data forwarding enabled can result
> > > in a processor deadlock" for old OMAP3 (r1pX revision of Cortex-A8)?
> > >
> > >     http://git.denx.de/?p=u-boot.git;a=commitdiff;h=041d42e789aba20296ffcde92173f100a9592880
> > >
> > > This used to be in U-Boot earlier, but seems to have vanished from the
> > > current U-Boot code. I would probably submit a patch myself, but I
> > > don't have such hardware anymore to test it.
> > 
> > Could I have a review by - I think I screwed up r1-r3 handling in
> > start.S when multiple erratas are enabled - which by some luck, I
> > have'nt hit.. I should probably fix that.
> 
> Sadly, I don't have this old hardware anymore. I have lent my first
> generation beagleboard to another person several years ago and have no
> idea where it is now. Maybe I should try to get it back one day :)
> 
> But taking the "formal" route, I checked who is the current beagleboard
> maintainer and looks like that's Tom Rini, who is already quite
> conveniently in the CC ;-)
> 
> Basically, this old hardware is either maintained or not. If it is
> maintained, then probably the board maintainer is the best person to
> review and test the errata patches.

Picking up again, I have original Beagleboards but I need a testcase.
Is it as simple as "Linux still boots to login on serial and doesn't
segfault everywhere" ?

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150302/bf788ef1/attachment.sig>

  reply	other threads:[~2015-03-02 21:16 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-25 20:55 [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 01/11] ARM: Introduce erratum workaround for 798870 Nishanth Menon
2015-03-03 16:29   ` Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 02/11] ARM: Introduce erratum workaround for 454179 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 03/11] ARM: Introduce erratum workaround for 430973 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 04/11] ARM: Introduce erratum workaround for 621766 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 05/11] ARM: OMAP: Change set_pl310_ctrl_reg to be generic Nishanth Menon
2015-03-03 17:08   ` Tom Rini
2015-03-03 17:12     ` Nishanth Menon
2015-03-03 17:54       ` Nishanth Menon
2015-03-03 17:55       ` Tom Rini
2015-02-25 20:55 ` [U-Boot] [PATCH V3 06/11] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 07/11] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 08/11] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 09/11] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 10/11] ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 Nishanth Menon
2015-02-25 20:55 ` [U-Boot] [PATCH V3 11/11] ARM: OMAP3: rx51: " Nishanth Menon
2015-02-26  7:40 ` [U-Boot] [PATCH V3 0/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Siarhei Siamashka
2015-02-26 14:50   ` Nishanth Menon
2015-02-26 16:14     ` Siarhei Siamashka
2015-03-02 21:16       ` Tom Rini [this message]
2015-03-03  6:45         ` Siarhei Siamashka
2015-03-03 16:25           ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150302211608.GC25373@bill-the-cat \
    --to=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox