From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Wed, 4 Mar 2015 13:48:32 +0100
Subject: [U-Boot] [PATCHv2 09/20] arm: socfpga: spl: printout sdram size
In-Reply-To: <1425313688-23595-10-git-send-email-dinguyen@opensource.altera.com>
References: <1425313688-23595-1-git-send-email-dinguyen@opensource.altera.com>
 <1425313688-23595-10-git-send-email-dinguyen@opensource.altera.com>
Message-ID: <201503041348.32883.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday, March 02, 2015 at 05:27:57 PM, dinguyen at opensource.altera.com wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
> 
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> ---
> v2: Add a debug print
> ---
>  arch/arm/cpu/armv7/socfpga/spl.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/socfpga/spl.c
> b/arch/arm/cpu/armv7/socfpga/spl.c index 71021f0..ea4a1fb 100644
> --- a/arch/arm/cpu/armv7/socfpga/spl.c
> +++ b/arch/arm/cpu/armv7/socfpga/spl.c
> @@ -55,6 +55,7 @@ u32 spl_boot_device(void)
>   */
>  void spl_board_init(void)
>  {
> +	unsigned long sdram_size;
>  #ifndef CONFIG_SOCFPGA_VIRTUAL_TARGET
>  	cm_config_t cm_default_cfg = {
>  		/* main group */
> @@ -187,4 +188,7 @@ void spl_board_init(void)
>  		puts("SDRAM calibration failed!\n");
>  		hang();
>  	}
> +
> +	sdram_size = sdram_calculate_size();
> +	debug("SDRAM: %ld MiB\n", (sdram_size >> 20));

You don't need the inner brackets, they're redundant.

Otherwise:

Reviewed-by: Marek Vasut <marex@denx.de>

Best regards,
Marek Vasut