From mboxrd@z Thu Jan  1 00:00:00 1970
From: Albert ARIBAUD <albert.u.boot@aribaud.net>
Date: Sat, 14 Mar 2015 22:47:08 +0100
Subject: [U-Boot] bav335x support broken
In-Reply-To: <CANKiNjVP7N8X8T4fB9Z4ofVeQ08KnvW+DSyDZxppvUSMvRHRXQ@mail.gmail.com>
References: <A0D2FA3B-F9FB-4F11-B489-BFA7CE23665D@gigadevices.com>
 <CANKiNjVP7N8X8T4fB9Z4ofVeQ08KnvW+DSyDZxppvUSMvRHRXQ@mail.gmail.com>
Message-ID: <20150314224708.2681ebc7@lilith>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Anish,

(apologies for any duplicates. My mail server and the U-Boot ML are
playing tricks with my sanity.)

On Sat, 14 Mar 2015 23:25:03 +0530, Anish Khurana
<anish.khurana130181@gmail.com> wrote:
> Hi Gilles,
> 
> This u-boot version is having lot of changes , they have enabled
> Kconfig similar to Kernel and having GUI support ( make menuconfig) .
> so if you are gettting error as you mentioned , try to add Device
> model configurations  and SYS malloc() as :
> 
> Steps 1 make <birdland_bav335x config>
> Step 2 make menuconfig
> Step 3 Device driver -> Enable driver model, enable Driver model for serial)
> Step 4 malloc() pool , General setup --> Enable malloc() pool.
> 
> Please try this , I think it will work.

Thanks Anish for pointing this out. I just saw this in my all-ARM
build. If this fix works, then the defconfig for both birdland_bav335a
and birdland_bav335b should be adjusted so as not to need the manual
menuconfig fix.

> Thanks,
> Anish

Amicalement,
-- 
Albert.