From mboxrd@z Thu Jan  1 00:00:00 1970
From: Andrej Rosano <andrej@inversepath.com>
Date: Thu, 19 Mar 2015 00:00:55 +0100
Subject: [U-Boot] [PATCH] arm: mx5: Add support for USB armory board
In-Reply-To: <CAOMZO5DGOmsGsHCYgnA9nwkwKXpSj-s--FfQZPi-XMW9DXGubg@mail.gmail.com>
References: <1424768633-22084-1-git-send-email-andrej@inversepath.com>
 <CAGHP0pJt4XHvhGXDbVvXz1v-BoLyDTY9S1ABFGSUwEm2aAA6yw@mail.gmail.com>
 <CAOMZO5DGOmsGsHCYgnA9nwkwKXpSj-s--FfQZPi-XMW9DXGubg@mail.gmail.com>
Message-ID: <20150318230055.GA14781@core.inversepath.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tue, Mar 17, 2015 at 01:30:12PM -0300, Fabio Estevam wrote:
> On Mon, Mar 16, 2015 at 1:50 PM, Chris Kuethe <chris.kuethe@gmail.com> wrote:
> 
> > U-Boot 2015.04-rc3-00209-ga74ef40-dirty (Mar 15 2015 - 22:04:22)
> >
> > CPU:   Freescale i.MX53 rev2.1 at 800 MHz
> > Reset cause: WDOG
> 
> Here the reset cause is printed correctly.
> 
> > Board: Inverse Path USB armory MkI
> > I2C:   ready
> > DRAM:  512 MiB
> > MMC:   FSL_SDHC: 0
> > In:    serial
> > Out:   serial
> > Err:   serial
> > CPU:   Freescale i.MX53 rev2.1 at 800 MHz
> > Reset cause: unknown reset
> 
> ,but here it fails.
> 
> Why does CPU version and reset cause are printed twice?

The print_cpuinfo() was called twice, fixed in the v2 patch
I just submitted.

> 
> Is this happening with all mx53 boards or only with this one?

mx53loco should have the same issue, but I did not tested it.

Andrej

> 
> I currently don't have access to any mx53 board to test this myself.
> 
> I am adding some folks on Cc who may have access to other mx53 boards
> and could probably test whether we have a common mx53 issue here.
> 
> Regards,
> 
> Fabio Estevam

--
Andrej Rosano                                           Inverse Path Srl
<andrej@inversepath.com>                      http://www.inversepath.com

0x01939B21            5BB8 574E 68E8 D841 E18F  D5E9 CEAD E0CF 0193 9B21