From: Mark Rutland <mark.rutland@arm.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/28] armv8/ls2085a: Fix generic timer clock source
Date: Thu, 19 Mar 2015 18:08:57 +0000 [thread overview]
Message-ID: <20150319180857.GG10153@leverpostej> (raw)
In-Reply-To: <1426783559-26610-4-git-send-email-yorksun@freescale.com>
On Thu, Mar 19, 2015 at 04:45:35PM +0000, York Sun wrote:
> The timer clock is system clock divided by 4, not fixed 12MHz. This is
> common to the SoC, not board specific.
>
> Signed-off-by: York Sun <yorksun@freescale.com>
> ---
> README | 8 ++++++++
> arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 24 ++++++++++++++++++++++++
> board/freescale/ls2085a/ls2085a.c | 18 ------------------
> include/configs/ls2085a_common.h | 6 +++++-
> 4 files changed, 37 insertions(+), 19 deletions(-)
>
> diff --git a/README b/README
> index f473515..776ebf4 100644
> --- a/README
> +++ b/README
> @@ -690,6 +690,14 @@ The following options need to be configured:
> exists, unlike the similar options in the Linux kernel. Do not
> set these options unless they apply!
>
> + COUNTER_FREQUENCY
> + Generic timer clock source frequency.
> +
> + COUNTER_FREQUENCY_REAL
> + Generic timer clock source frequency if the real clock is
> + different from COUNTER_FREQUENCY, and can only be determined
> + at run time.
> +
> NOTE: The following can be machine specific errata. These
> do have ability to provide rudimentary version and machine
> specific checks, but expect no product checks.
> diff --git a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
> index 94fd147..e985181 100644
> --- a/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
> +++ b/arch/arm/cpu/armv8/fsl-lsch3/cpu.c
> @@ -395,3 +395,27 @@ int arch_early_init_r(void)
>
> return 0;
> }
> +
> +int timer_init(void)
> +{
> + u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
> + u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
> +#ifdef COUNTER_FREQUENCY_REAL
> + unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
> +
> + /* Update with accurate clock frequency */
> + asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory");
> +#endif
Is this executed on all CPUs, or do secondary CPUs have CNTFRQ
programmed with the correct value elsewhere?
Mark.
next prev parent reply other threads:[~2015-03-19 18:08 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-19 16:45 [U-Boot] [PATCH 01/28] armv8/fsl-lsch3: Implement workaround for erratum A008585 York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 02/28] armv8/ls2085a: Update common header file York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 03/28] armv8/fsl-lsch3: Fix platform clock calculation York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 04/28] armv8/ls2085a: Fix generic timer clock source York Sun
2015-03-19 18:08 ` Mark Rutland [this message]
2015-03-19 18:16 ` York Sun
2015-03-19 18:17 ` Mark Rutland
2015-03-19 18:24 ` York Sun
2015-03-19 18:46 ` Mark Rutland
2015-03-19 19:26 ` York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 05/28] armv8/ls2085a: Add support for reset request York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 06/28] armv8/fsl-lsch3: Set nodes in DVM domain York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 07/28] armv8/fsl-lsch3: Update early MMU table York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 08/28] fsl-lsch3: Introduce place for common early SoC init York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 09/28] armv8/ls2085a: Add workaround for USB erratum A-008751 York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 10/28] armv8/fsl-lsch3: Use correct compatible for serial clock fixup York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 11/28] driver/ldpaa_eth: Update ldpaa ethernet driver York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 12/28] armv8: Add SerDes framework for LayerScape Architecture York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 13/28] net/phy/cortina: Fix compilation warning York Sun
2015-03-19 17:17 ` Joe Hershberger
2015-03-19 16:45 ` [U-Boot] [PATCH 14/28] drivers/fsl-mc: Changed MC firmware loading for new boot architecture York Sun
2015-03-19 17:53 ` Kim Phillips
2015-03-23 20:06 ` Jose Rivera
2015-03-23 20:34 ` Kim Phillips
2015-03-23 21:15 ` Jose Rivera
2015-03-23 22:05 ` Kim Phillips
2015-03-24 15:14 ` Jose Rivera
2015-03-24 15:35 ` Kim Phillips
[not found] ` <CALRxmdDfZKYh3QOSnz1LzvkpWuS2OzontG_fLECuMgzz2N68uA@mail.gmail.com>
2015-03-25 21:12 ` Kim Phillips
2015-03-26 23:57 ` Jose Rivera
2015-03-27 16:01 ` Kim Phillips
2015-03-19 16:45 ` [U-Boot] [PATCH 15/28] net/memac_phy: reuse driver for little endian SoCs York Sun
2015-03-19 18:03 ` Joe Hershberger
2015-03-20 3:06 ` Shaohui Xie
2015-03-20 3:33 ` Joe Hershberger
2015-03-20 3:48 ` Shaohui Xie
2015-03-20 3:58 ` Joe Hershberger
2015-03-19 16:45 ` [U-Boot] [PATCH 16/28] armv8/fsl-ch3: Add support to print RCW configuration York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 17/28] armv8/fsl-lsch3: Enable system error aborts York Sun
2015-03-19 18:14 ` Mark Rutland
2015-03-19 19:52 ` Scott Wood
2015-03-19 19:54 ` York Sun
2015-03-19 19:58 ` Scott Wood
2015-03-19 20:02 ` York Sun
2015-03-19 20:06 ` Scott Wood
2015-03-19 20:27 ` York Sun
2015-03-19 20:37 ` Scott Wood
2015-03-19 20:47 ` York Sun
2015-03-19 20:51 ` Scott Wood
2015-03-19 20:56 ` York Sun
2015-03-19 21:34 ` Scott Wood
2015-03-20 11:31 ` Mark Rutland
2015-03-19 16:45 ` [U-Boot] [PATCH 18/28] driver/ldpaa: Add support of WRIOP static data structure York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 19/28] armv8/ls2085aqds: Add support of LS2085AQDS platform York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 20/28] armv8/ls2085ardb: Add support of LS2085ARDB platform York Sun
2015-03-20 23:01 ` Scott Wood
2015-03-21 0:08 ` York Sun
2015-03-21 0:12 ` Scott Wood
2015-03-21 0:16 ` York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 21/28] drivers/fsl-mc: Autoload AOIP image from NOR flash York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 22/28] board/ls2085qds: Add support ethernet York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 23/28] driver/ifc: Add 64KB page support York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 24/28] armv8/ls2085aqds: NAND boot support York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 25/28] freescale/qixis: Add support for booting from NAND York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 26/28] armv8/ls2085ardb: Enable NAND SPL support York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 27/28] ls2085a: esdhc: Add esdhc support for ls2085a York Sun
2015-03-19 16:45 ` [U-Boot] [PATCH 28/28] armv8/fsl-lsch3: Implement workaround for I2C issue York Sun
2015-03-20 5:35 ` Heiko Schocher
2015-03-20 16:08 ` York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150319180857.GG10153@leverpostej \
--to=mark.rutland@arm.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox