[U-Boot] arm: mx5: Add support for USB armory board

[Andrej Rosano <andrej@inversepath.com>]

Hi Vagrant,

On Thu, Mar 19, 2015 at 09:55:26AM -0700, Vagrant Cascadian wrote:
> On 2015-02-24, andrej at inversepath.com wrote:
> > Add support for Inverse Path USB armory board, an open source
> > flash-drive sized computer based on Freescale i.MX53 SoC.
> ...
> > diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
> > new file mode 100644
> > index 0000000..e00ec7b
> > --- /dev/null
> > +++ b/include/configs/usbarmory.h
> ...
> > +#include <asm/arch/imx-regs.h>
> > +#include <config_cmd_default.h>
> 
> Would you consider patches that include config_distro_defaults.h and
> config_distro_bootcmd.h, documented in doc/README.distro? It may require
> adding several variables such as fdt_addr_r, fdtfile, ramdisk_addr_r,
> ramdiskfile, kernel_addr_r, bootfile, pxe_addr_r and scriptaddr,
> documented in README and doc/README.distro. I'd be happy to work on
> patches.
> 
> I'd like to enable the usbarmory target in Debian's u-boot packages, and
> this would make it easier for it to behave more-or-less consistantly
> with several other platforms, and allow for more flexibility when
> booting.

Sure, it would be nice to have this included in the patch.
I didn't know about this, I will take a look as well. Let me know if
you need any help from my side.

Thanks

Andrej

> 
> 
> live well,
>   vagrant



--
Andrej Rosano                                           Inverse Path Srl
<andrej@inversepath.com>                      http://www.inversepath.com

0x01939B21            5BB8 574E 68E8 D841 E18F  D5E9 CEAD E0CF 0193 9B21