From: Lukasz Majewski <l.majewski@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 1/1] ARM: DRA7XX: Add config file for Android with fastboot support
Date: Mon, 23 Mar 2015 09:50:46 +0100 [thread overview]
Message-ID: <20150323095046.64b2254a@amdc2363> (raw)
In-Reply-To: <1426617503-12477-1-git-send-email-dileep.katta@linaro.org>
Hi Dileep,
> - Added new configuration for Android fastboot
> - This is based on following patch modified accordingly
> http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=b2e04f92b5d91c708b6fd6b79d2266966ac51f4b
>
> Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
> Signed-off-by: Dileep Katta <dileep.katta@linaro.org>
> ---
> Changes in v2:
> - Merged the header file content to existing dra7xx_evm.h to
> avoid duplication
> - Removed unnecessary definitions as per comments
>
> board/ti/dra7xx/MAINTAINERS | 1 +
> configs/dra7xx_evm_android_defconfig | 5 +++++
> include/configs/dra7xx_evm.h | 30
> ++++++++++++++++++++++++++++++ 3 files changed, 36 insertions(+)
> create mode 100644 configs/dra7xx_evm_android_defconfig
>
> diff --git a/board/ti/dra7xx/MAINTAINERS b/board/ti/dra7xx/MAINTAINERS
> index 5ec6769..1b5ae71 100644
> --- a/board/ti/dra7xx/MAINTAINERS
> +++ b/board/ti/dra7xx/MAINTAINERS
> @@ -6,3 +6,4 @@ F: include/configs/dra7xx_evm.h
> F: configs/dra7xx_evm_defconfig
> F: configs/dra7xx_evm_qspiboot_defconfig
> F: configs/dra7xx_evm_uart3_defconfig
> +F: configs/dra7xx_evm_android_defconfig
> diff --git a/configs/dra7xx_evm_android_defconfig
> b/configs/dra7xx_evm_android_defconfig new file mode 100644
> index 0000000..5fdce85
> --- /dev/null
> +++ b/configs/dra7xx_evm_android_defconfig
> @@ -0,0 +1,5 @@
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,DRA7XX_ANDROID"
> ++S:CONFIG_ARM=y
> ++S:CONFIG_OMAP54XX=y
> ++S:CONFIG_TARGET_DRA7XX_EVM=y
> diff --git a/include/configs/dra7xx_evm.h
> b/include/configs/dra7xx_evm.h index dee2b11..dd20e08 100644
> --- a/include/configs/dra7xx_evm.h
> +++ b/include/configs/dra7xx_evm.h
> @@ -43,6 +43,16 @@
> "uuid_disk=${uuid_gpt_disk};" \
> "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
>
> +#ifdef CONFIG_DRA7XX_ANDROID
> +/* Fastboot */
> +#define CONFIG_CMD_FASTBOOT
> +#define CONFIG_ANDROID_BOOT_IMAGE
> +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
> +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000
> +#define CONFIG_FASTBOOT_FLASH
> +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
> +#endif
> +
> #include <configs/ti_omap5_common.h>
>
> /* Enhance our eMMC support / experience. */
> @@ -115,7 +125,11 @@
> #define CONFIG_SPL_SPI_SUPPORT
> #define CONFIG_SPL_SPI_LOAD
> #define CONFIG_SPL_SPI_FLASH_SUPPORT
> +#ifdef CONFIG_DRA7XX_ANDROID
> +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000
> +#else
> #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
> +#endif
>
> #define CONFIG_SUPPORT_EMMC_BOOT
>
> @@ -130,6 +144,22 @@
> #define CONFIG_OMAP_USB_PHY
> #define CONFIG_OMAP_USB2PHY2_HOST
>
> +/* USB GADGET */
> +#define CONFIG_USB_GADGET
> +#define CONFIG_MUSB_GADGET
> +#define CONFIG_MUSB_PIO_ONLY
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
> +#ifdef CONFIG_CMD_FASTBOOT
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0451
> +#define CONFIG_G_DNL_PRODUCT_NUM 0xd022
> +#else
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0403
> +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
> +#endif
> +#define CONFIG_USB_GADGET_DUALSPEED
> +
> /* SATA */
> #define CONFIG_BOARD_LATE_INIT
> #define CONFIG_CMD_SCSI
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
prev parent reply other threads:[~2015-03-23 8:50 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-03 11:10 [U-Boot] [PATCH v1 1/4] ARM: DRA7XX: Add config file for Android with fastboot support Dileep Katta
2015-03-03 11:10 ` [U-Boot] [PATCH v2 2/4] fastboot: call board_usb_init() to enable usb Dileep Katta
2015-03-04 13:19 ` Lukasz Majewski
2015-03-04 17:05 ` Stegmaier, Angela
2015-03-04 18:29 ` Tom Rini
2015-03-04 19:06 ` Dileep Katta
2015-03-05 14:37 ` Tom Rini
2015-03-12 6:36 ` Dileep Katta
2015-03-12 8:55 ` Lukasz Majewski
2015-03-12 17:28 ` Marek Vasut
2015-03-12 21:12 ` Dileep Katta
2015-03-13 7:53 ` Lukasz Majewski
2015-03-13 19:28 ` Dileep Katta
2015-03-13 20:55 ` Lukasz Majewski
2015-03-27 17:53 ` Dileep Katta
2015-03-27 18:15 ` Tom Rini
2015-03-27 18:25 ` Marek Vasut
2015-03-30 8:38 ` Lukasz Majewski
2015-03-03 11:10 ` [U-Boot] [PATCH v3 3/4] ARM: DRA7: Set serial number environment variable Dileep Katta
2015-03-04 13:23 ` Lukasz Majewski
2015-03-04 16:53 ` Tom Rini
2015-03-07 7:00 ` Nishanth Menon
2015-03-03 11:10 ` [U-Boot] [PATCH v1 4/4] ARM: DRA7: fastboot: Implement reboot-bootloader command - Implemented fb_set_reboot_flag() for DRA7 - Defined a weak function, fb_check_reboot_flag() - Implemented for DRA7 Dileep Katta
2015-03-03 14:15 ` Rob Herring
2015-03-04 16:57 ` Tom Rini
2015-03-04 13:31 ` Lukasz Majewski
2015-03-03 11:53 ` [U-Boot] [PATCH v1 1/4] ARM: DRA7XX: Add config file for Android with fastboot support Dileep Katta
2015-03-04 13:18 ` Lukasz Majewski
2015-03-04 16:52 ` Tom Rini
2015-03-12 6:31 ` Dileep Katta
2015-03-12 19:29 ` Tom Rini
2015-03-17 18:38 ` [U-Boot] [PATCH v2 1/1] " Dileep Katta
2015-03-18 16:11 ` Tom Rini
2015-03-18 21:12 ` Dileep Katta
2015-03-19 13:15 ` Tom Rini
2015-03-23 22:41 ` Dileep Katta
2015-03-24 22:34 ` [U-Boot] [PATCH v3 1/3] ARM: DRA7XX: Enable Fastboot Dileep Katta
2015-03-24 22:34 ` [U-Boot] [PATCH v3 2/3] ARM: DRA7: Set serial number environment variable Dileep Katta
2015-03-27 14:19 ` Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot, v3, " Tom Rini
2015-03-24 22:34 ` [U-Boot] [PATCH v3 3/3] fastboot: ARM: OMAP5: Enable reboot-bootloader Dileep Katta
2015-03-27 14:19 ` Tom Rini
2015-03-27 17:28 ` Dileep Katta
2015-03-27 17:36 ` [U-Boot] [PATCH v4 " Dileep Katta
2015-03-27 18:02 ` Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot, v4, " Tom Rini
2015-03-27 14:19 ` [U-Boot] [PATCH v3 1/3] ARM: DRA7XX: Enable Fastboot Tom Rini
2015-04-23 22:03 ` [U-Boot] [U-Boot,v3,1/3] " Tom Rini
2015-03-23 8:50 ` Lukasz Majewski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150323095046.64b2254a@amdc2363 \
--to=l.majewski@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox