[U-Boot] [PATCH 2/3] ARM: bcm2835: implement phys_to_bus/bus_to_phys

[Marek Vasut <marex@denx.de>]

On Wednesday, March 25, 2015 at 03:07:34 AM, Stephen Warren wrote:
> The BCM283[56] contain both a L1 and L2 cache between the GPU (a/k/a
> VideoCore CPU?) and DRAM. DMA-capable peripherals can also optionally
> access DRAM via this same  L2 cache (although they always bypass the L1
> cache). Peripherals select whether to use or bypass the cache via the
> top two bits of the bus address.
> 
> An IOMMU exists between the ARM CPU and the rest of the system. This
> controls whether the ARM CPU's accesses use or bypass the L1 and/or L2
> cache. This IOMMU is configured/controlled exclusively by the VideoCore
> CPU.
> 
> In order for DRAM accesses made by the ARM core to be coherent with
> accesses made by other DMA peripherals, we must program a bus address
> into those peripherals that causes the peripheral's accesses to use the
> same set of caches that the ARM core's accesses will use.
> 
> On the RPi1, the VideoCore firmware sets up the IOMMU to enable use of
> the L2 cache. This corresponds to addresses based at 0x40000000.
> 
> On the RPi2, the VideoCore firmware sets up the IOMMU to disable use of
> the L2 cache. This corresponds to addresses based at 0xc0000000.
> 
> This patch implements U-Boot's phys_to_bus/bus_to_phys APIs according
> to those rules.
> 
> For full details of this setup, please see Dom Cobley's description at:
> http://lists.denx.de/pipermail/u-boot/2015-March/208201.html
> http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/215038
> https://www.mail-archive.com/u-boot at lists.denx.de/msg166568.html
> 
> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>

Applied to -next, thanks!

Best regards,
Marek Vasut