From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/4] Add support for stm32f429-discovery board
Date: Wed, 25 Mar 2015 12:58:30 -0400 [thread overview]
Message-ID: <20150325165830.GU32541@bill-the-cat> (raw)
In-Reply-To: <CAGTfZH323xjhJ83aRx3++2P5wjE=PJphwKeNc_wVpqNSncJ3ww@mail.gmail.com>
On Wed, Mar 25, 2015 at 01:07:47PM +0900, Chanwoo Choi wrote:
> Hi Kamil,
>
> I tested this patch-set in STM32 Discovery board. After applied this
> patch-set on latest u-boot, I could not see the normal u-boot log. I
> saw broken console log. I used the USART1 port (pa9, pa10 gpio pin).
>
> Could you give me a tip to resolve this issue?
I bet this needs changes similar to b81bdf6 as that was a similar
problem I believe. In short, DM needs to be enabled now.
>
> Best Regards,
> Chanwoo Choi
>
> 2015? 3? 1? ???, Kamil Lulko<rev13@wp.pl>?? ??? ???:
>
> > The following patches implement basic support for the ARMv7-M
> > microcontroller
> > architecture.
> > Additionally, stm32f429-discovery board support is added with tested
> > ability
> > to boot uClinux from the embedded Flash memory.
> >
> > Kamil Lulko (4):
> > ARM: Add ARMv7-M support
> > ARMv7M: Add STM32F4 support
> > stm32f4: Add serial driver
> > stm32f4: Add support for stm32f429-discovery board
> >
> > arch/arm/Kconfig | 9 +
> > arch/arm/cpu/armv7m/Makefile | 11 +
> > arch/arm/cpu/armv7m/config.mk | 8 +
> > arch/arm/cpu/armv7m/cpu.c | 35 +++
> > arch/arm/cpu/armv7m/start.S | 15 ++
> > arch/arm/cpu/armv7m/stm32f4/Makefile | 11 +
> > arch/arm/cpu/armv7m/stm32f4/clock.c | 209 +++++++++++++++
> > arch/arm/cpu/armv7m/stm32f4/flash.c | 143 ++++++++++
> > arch/arm/cpu/armv7m/stm32f4/soc.c | 37 +++
> > arch/arm/cpu/armv7m/stm32f4/timer.c | 118 +++++++++
> > arch/arm/include/asm/arch-stm32f4/fmc.h | 75 ++++++
> > arch/arm/include/asm/arch-stm32f4/gpio.h | 116 +++++++++
> > arch/arm/include/asm/arch-stm32f4/stm32.h | 108 ++++++++
> > arch/arm/include/asm/armv7m.h | 60 +++++
> > arch/arm/lib/Makefile | 8 +-
> > arch/arm/lib/crt0.S | 30 +++
> > arch/arm/lib/interrupts_m.c | 95 +++++++
> > arch/arm/lib/relocate.S | 13 +
> > arch/arm/lib/vectors_m.S | 57 ++++
> > board/st/stm32f429-discovery/Kconfig | 19 ++
> > board/st/stm32f429-discovery/MAINTAINERS | 6 +
> > board/st/stm32f429-discovery/Makefile | 12 +
> > board/st/stm32f429-discovery/led.c | 35 +++
> > board/st/stm32f429-discovery/stm32f429-discovery.c | 288
> > +++++++++++++++++++++
> > configs/stm32f429-discovery_defconfig | 2 +
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/stm32_gpio.c | 199 ++++++++++++++
> > drivers/serial/Makefile | 1 +
> > drivers/serial/serial.c | 2 +
> > drivers/serial/serial_stm32.c | 117 +++++++++
> > include/configs/stm32f429-discovery.h | 106 ++++++++
> > include/flash.h | 2 +
> > 32 files changed, 1946 insertions(+), 2 deletions(-)
> > create mode 100644 arch/arm/cpu/armv7m/Makefile
> > create mode 100644 arch/arm/cpu/armv7m/config.mk
> > create mode 100644 arch/arm/cpu/armv7m/cpu.c
> > create mode 100644 arch/arm/cpu/armv7m/start.S
> > create mode 100644 arch/arm/cpu/armv7m/stm32f4/Makefile
> > create mode 100644 arch/arm/cpu/armv7m/stm32f4/clock.c
> > create mode 100644 arch/arm/cpu/armv7m/stm32f4/flash.c
> > create mode 100644 arch/arm/cpu/armv7m/stm32f4/soc.c
> > create mode 100644 arch/arm/cpu/armv7m/stm32f4/timer.c
> > create mode 100644 arch/arm/include/asm/arch-stm32f4/fmc.h
> > create mode 100644 arch/arm/include/asm/arch-stm32f4/gpio.h
> > create mode 100644 arch/arm/include/asm/arch-stm32f4/stm32.h
> > create mode 100644 arch/arm/include/asm/armv7m.h
> > create mode 100644 arch/arm/lib/interrupts_m.c
> > create mode 100644 arch/arm/lib/vectors_m.S
> > create mode 100644 board/st/stm32f429-discovery/Kconfig
> > create mode 100644 board/st/stm32f429-discovery/MAINTAINERS
> > create mode 100644 board/st/stm32f429-discovery/Makefile
> > create mode 100644 board/st/stm32f429-discovery/led.c
> > create mode 100644 board/st/stm32f429-discovery/stm32f429-discovery.c
> > create mode 100644 configs/stm32f429-discovery_defconfig
> > create mode 100644 drivers/gpio/stm32_gpio.c
> > create mode 100644 drivers/serial/serial_stm32.c
> > create mode 100644 include/configs/stm32f429-discovery.h
> >
> > --
> > 1.9.1
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de <javascript:;>
> > http://lists.denx.de/mailman/listinfo/u-boot
> >
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150325/4ad0d26c/attachment.sig>
next prev parent reply other threads:[~2015-03-25 16:58 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-01 11:44 [U-Boot] [PATCH 0/4] Add support for stm32f429-discovery board Kamil Lulko
2015-03-01 11:44 ` [U-Boot] [PATCH 1/4] ARM: Add ARMv7-M support Kamil Lulko
2015-03-05 15:32 ` Tom Rini
2015-03-30 22:06 ` Andreas Färber
2015-04-01 0:55 ` Tom Rini
2015-04-23 13:14 ` [U-Boot] [U-Boot,1/4] " Tom Rini
2015-03-01 11:44 ` [U-Boot] [PATCH 2/4] ARMv7M: Add STM32F4 support Kamil Lulko
2015-03-05 15:34 ` Tom Rini
2015-04-23 13:14 ` [U-Boot] [U-Boot,2/4] " Tom Rini
2015-03-01 11:44 ` [U-Boot] [PATCH 3/4] stm32f4: Add serial driver Kamil Lulko
2015-03-05 15:34 ` Tom Rini
2015-04-23 13:14 ` [U-Boot] [U-Boot,3/4] " Tom Rini
2015-03-01 11:44 ` [U-Boot] [PATCH 4/4] stm32f4: Add support for stm32f429-discovery board Kamil Lulko
2015-03-05 15:35 ` Tom Rini
2015-04-23 13:14 ` [U-Boot] [U-Boot, " Tom Rini
2015-03-25 4:07 ` [U-Boot] [PATCH 0/4] " Chanwoo Choi
2015-03-25 16:58 ` Tom Rini [this message]
2015-03-26 13:47 ` Kamil Lulko
2015-03-26 14:07 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150325165830.GU32541@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).