From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Mon, 6 Apr 2015 15:13:30 +0200 Subject: [U-Boot] [PATCH v2 0/80] dm: Add USB support In-Reply-To: References: <1427307788-7496-1-git-send-email-sjg@chromium.org> <201503262040.14411.marex@denx.de> Message-ID: <201504061513.30130.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday, April 06, 2015 at 01:38:13 AM, Simon Glass wrote: > Hi Marek, Hi Simon, > On 26 March 2015 at 13:40, Marek Vasut wrote: > > On Wednesday, March 25, 2015 at 07:21:48 PM, Simon Glass wrote: > >> This series adds driver model support to USB. The intent is to permit > >> the various subsystems (OHCI, EHCI, XHCI) to co-exist and allow any > >> number of USB ports of different types. > >> > >> With the RFC series, only USB controllers had a real driver model > >> device. USB devices (including the hub in the controller) were not > >> modelled as driver model devices. > >> > >> While this was expedient, and produced much fewer patches, it is not a > >> long-term solution. Also, since then, driver model Ethernet support > >> (which USB can use) has been merged to u-boot-dm/next. It seems better > >> to bite the bullet and do a full conversion. > > > > Whew. > > > > Reviewed-by: Marek Vasut > > Thanks very much for working through these! > > Unless there are other comments I plan to apply this to u-boot-dm/next > in the next few days. I expect it will need some tweaking as boards > are moved over too. Please apply, I'm really looking forward to this. Thank you very much for putting all the effort into this ! Best regards, Marek Vasut