[U-Boot] [PATCH v2 0/6] Add support for Colibri Vybrid Modules

[maitysanchayan at gmail.com <maitysanchayan@gmail.com>]

Hi,

On 15-04-11 18:46:15, Marek Vasut wrote:
> On Wednesday, April 08, 2015 at 03:20:04 PM, Sanchayan Maity wrote:
> > Hello,
> > 
> > This is the second version of the patchset which adds support for the
> > Toradex Colibri Vybrid VF50 and VF61 modules. Boot up has been tested
> > using the serial loader over UART.
> 
> Hi!
> 
> Stefano, maybe you can pick 1,2,3,4,6 right away for next? This way, we
> can solve 5/6 separately, since it might need some further dicussion. I
> don't want that patch to block the rest of the series though.

The sixth patch has some minor dependencies on the fifth patch like some 
#defines and configuration we enable for Colibri. In case the fifth 
patch will require some more discussion and time, then I guess I will 
need to rework the sixth patch and then everything related to USB can 
go in a later patch. The rework will be minor. So the v3 will be without 
USB support and USB will go in later once this gets applied. Perhaps we
will send the USB along with some more other featureset addition like
gpio support for Vybrid which my colleague did recently along with some
driver model/dt stuff.

By the way, where the fifth patch is concerned, is it related to the 
discussion Fabio pointed out in the discussion on first version of the 
patch? uboot trying to get rid of the 'no register access via offset' 
rule? Anything required I can rework accordingly.

Thanks & Regards,
Sanchayan Maity.

> 
> Best regards,
> Marek Vasut