[U-Boot] [PATCH v2] video, ipu: make ldb clock frequenz overwriteable through board code

[Anatolij Gustschin <agust@denx.de>]

On Mon, 20 Apr 2015 07:53:48 +0200
Heiko Schocher <hs@denx.de> wrote:

> the ldb clock can be setup in board code (for example set through PLL5).
> Update the ldb_clock rate also through board code.
> 
> This should be removed, if a clock framework is availiable.
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
> 
> ---
> 
> Changes in v2:
> - add comment from Eric Nelson
>   - move ipu_set_ldb_clock() from drivers/video/ipu.h to
>     imx-common/video.h
>   - remove g_ldb_clk with ldb_clk.rate, call ldb_clk directly,
>     instead of using g_ldb_clk
>  - add Tested-by from Eric Nelson
> 
>  arch/arm/include/asm/imx-common/video.h | 1 +
>  drivers/video/ipu.h                     | 1 -
>  drivers/video/ipu_common.c              | 8 ++++++++
>  3 files changed, 9 insertions(+), 1 deletion(-)

applied to u-boot-video/master. Thanks!

--
Anatolij