[U-Boot] [PATCH v2 2/6] common/cmd_boot: keep ARM v7M in thumb mode during do_go_exec()

[Felipe Balbi <balbi@ti.com>]

On Tue, Apr 21, 2015 at 02:01:31PM -0400, Matt Porter wrote:
> On Tue, Apr 21, 2015 at 12:47:24PM -0500, Felipe Balbi wrote:
> > On Tue, Apr 21, 2015 at 01:36:54PM -0400, Matt Porter wrote:
> > > On ARM v7M, the processor will return to ARM mode when executing
> > > a blx instruction with bit 0 of the address == 0. Always set it
> > 
> > but that's what the 'x' is for, right ? eXchange the CPU mode.
> 
> Yes.
> 
> > > to 1 to stay in thumb mode.
> > > 
> > > Signed-off-by: Matt Porter <mporter@konsulko.com>
> > > ---
> > >  common/cmd_boot.c | 4 ++++
> > >  1 file changed, 4 insertions(+)
> > > 
> > > diff --git a/common/cmd_boot.c b/common/cmd_boot.c
> > > index 8f2e070..20ce652 100644
> > > --- a/common/cmd_boot.c
> > > +++ b/common/cmd_boot.c
> > > @@ -38,6 +38,10 @@ static int do_go(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> > >  	 * pass address parameter as argv[0] (aka command name),
> > >  	 * and all remaining args
> > >  	 */
> > > +#ifdef CONFIG_CPU_V7M
> > > +	/* For ARM V7M, set bit zero to stay in Thumb mode */
> > > +	addr++;
> > > +#endif
> > 
> > what if we were in ARM state when we reached this point ? You're now
> > telling CPU to always switch to Thumb. Is this really what we want ?
> 
> We have no ARM state on this core so that's not possible.
> 
> > From ARM's instruction manual:
> > 
> > 
> > 
> > "
> > The BX and BLX instructions can change the processor state from ARM to
> > Thumb, or from Thumb to ARM.
> > 
> > BLX label always changes the state.
> > 
> > BX Rm and BLX Rm derive the target state from bit[0] of Rm:
> > 
> >     if bit[0] of Rm is 0, the processor changes to, or remains in, ARM
> >     state
> > 
> >     if bit[0] of Rm is 1, the processor changes to, or remains in, Thumb
> >     state.
> 
> Correct. The last statement is why this patch exists. There is no ARM
> mode on M3, we immediately fault. Having bit[0]=0 for BX/BLX is not
> permitted on V7M...something not covered in the generic description
> of these instructions.

it just seems weird that bit0 wouldn't just be assume 1 by the core
itself. I suppose as a consequence we can't use blx label with v7m
either ? :-s

cheers

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150421/6da24df5/attachment.sig>