From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Tue, 28 Apr 2015 10:47:59 -0400 Subject: [U-Boot] [PATCH 1/4] mx6cuboxi: Add HDMI output support In-Reply-To: <1430188244-28216-1-git-send-email-festevam@gmail.com> References: <1430188244-28216-1-git-send-email-festevam@gmail.com> Message-ID: <20150428144759.GG16702@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Apr 27, 2015 at 11:30:41PM -0300, Fabio Estevam wrote: > From: Fabio Estevam > > Add HDMI output using PLL5 as the source for the IPU DI clocks, > and accurate VESA timings. > > These settings are based on the patch from Soeren Moch > submitted for the tbs2910 mx6 based board. > > It allows the display to work properly at 1024x768 at 60. > > This should make the hdmi output signal compatible with most if not all > modern displays. > > Signed-off-by: Jon Nettleton > Signed-off-by: Fabio Estevam Reviewed-by: Tom Rini Tested-by: Tom Rini -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: