From: Pavel Machek <pavel@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] u-boot: adjust config_cmd_default.h not to raise ton of warnings
Date: Fri, 1 May 2015 11:14:12 +0200 [thread overview]
Message-ID: <20150501091411.GB7205@amd> (raw)
If there's duplicty between config system and config_cmd_default, a
ton of warnings is raised, because one uses plain defines, and other
defines it to 1. Adjust config_cmd_default.h not to provoke the
warnings.
Signed-off-by: Pavel Machek <pavel@denx.de>
diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h
index e79a13b..2f60d63 100644
--- a/include/config_cmd_default.h
+++ b/include/config_cmd_default.h
@@ -16,29 +16,29 @@
* hardware, not fully tested, etc.).
*/
-#define CONFIG_CMD_BDI /* bdinfo */
-#define CONFIG_CMD_BOOTD /* bootd */
-#define CONFIG_CMD_CONSOLE /* coninfo */
-#define CONFIG_CMD_ECHO /* echo arguments */
-#define CONFIG_CMD_EDITENV /* editenv */
-#define CONFIG_CMD_ENV_EXISTS /* query whether env variables exists */
-#define CONFIG_CMD_FPGA /* FPGA configuration Support */
-#define CONFIG_CMD_IMI /* iminfo */
-#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_BDI 1 /* bdinfo */
+#define CONFIG_CMD_BOOTD 1 /* bootd */
+#define CONFIG_CMD_CONSOLE 1 /* coninfo */
+#define CONFIG_CMD_ECHO 1 /* echo arguments */
+#define CONFIG_CMD_EDITENV 1 /* editenv */
+#define CONFIG_CMD_ENV_EXISTS 1 /* query whether env variables exists */
+#define CONFIG_CMD_FPGA 1 /* FPGA configuration Support */
+#define CONFIG_CMD_IMI 1 /* iminfo */
+#define CONFIG_CMD_ITEST 1 /* Integer (and string) test */
#ifndef CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
-#define CONFIG_CMD_IMLS /* List all found images */
+#define CONFIG_CMD_FLASH 1 /* flinfo, erase, protect */
+#define CONFIG_CMD_IMLS 1 /* List all found images */
#endif
-#define CONFIG_CMD_LOADB /* loadb */
-#define CONFIG_CMD_LOADS /* loads */
-#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */
-#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
-#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
-#define CONFIG_CMD_NFS /* NFS support */
-#define CONFIG_CMD_RUN /* run command in env variable */
-#define CONFIG_CMD_SAVEENV /* saveenv */
-#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
-#define CONFIG_CMD_SOURCE /* "source" command support */
-#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+#define CONFIG_CMD_LOADB 1 /* loadb */
+#define CONFIG_CMD_LOADS 1 /* loads */
+#define CONFIG_CMD_MEMORY 1 /* md mm nm mw cp cmp crc base loop */
+#define CONFIG_CMD_MISC 1 /* Misc functions like sleep etc*/
+#define CONFIG_CMD_NET 1 /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS 1 /* NFS support */
+#define CONFIG_CMD_RUN 1 /* run command in env variable */
+#define CONFIG_CMD_SAVEENV 1 /* saveenv */
+#define CONFIG_CMD_SETGETDCR 1 /* DCR support on 4xx */
+#define CONFIG_CMD_SOURCE 1 /* "source" command support */
+#define CONFIG_CMD_XIMG 1 /* Load part of Multi Image */
#endif /* _CONFIG_CMD_DEFAULT_H */
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next reply other threads:[~2015-05-01 9:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-01 9:14 Pavel Machek [this message]
2015-05-01 15:24 ` [U-Boot] [PATCH] u-boot: adjust config_cmd_default.h not to raise ton of warnings Stephen Warren
2015-05-03 10:01 ` Pavel Machek
2015-05-03 16:40 ` Stephen Warren
2015-05-03 19:33 ` Pavel Machek
2015-05-15 8:36 ` Pavel Machek
2015-05-15 9:12 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150501091411.GB7205@amd \
--to=pavel@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox