[U-Boot] [PATCH v2 0/8] omap-common: Common boot code OMAP3 support and SYS_BOOT-based fallback boot device

["Pali Rohár" <pali.rohar@gmail.com>]

On Wednesday 10 June 2015 12:34:39 Pali Roh?r wrote:
> On Wednesday 10 June 2015 11:54:00 Paul Kocialkowski wrote:
> > Le mardi 09 juin 2015 ? 20:34 +0200, Pali Roh?r a ?crit :
> > > On Tuesday 09 June 2015 18:28:29 Pali Roh?r wrote:
> > > > On Monday 08 June 2015 23:24:18 Paul Kocialkowski wrote:
> > > > > I would be very glad to see board maintainers give a go
> > > > > at the changeset before it gets merged, especially on devices like
> > > > > the Nokia RX-51 (N900) where some specific adaptation was needed.
> > > > 
> > > > So U-Boot is broken since e11c6c279d823dc0d2f470c5c2e3c0a9854a640f
> > > > (see other email thread). Until somebody fix that broken commit, I
> > > > cannot test your new patches in qemu or on (real) Nokia N900.
> > > 
> > > Now I tested this patch series on top of u-boot master with applied my 
> > > patch "Nokia RX-51: Fix calculating return address in save_boot_params".
> > >
> > > And it really as I thought broke booting U-Boot on Nokia N900 in qemu.
> > 
> > I'm confused here -- did you try booting on the actual device or in
> > qemu?
> > 
> 
> I tested your changes only in qemu. But because you removed (or better
> masked) required lowlevel asm code, it will not work on real n900 too.
> 
> > > So this patch series is NAK from my side.
> > 
> > Thanks for testing. Of course, the point is to make another version of
> > the patch set that fits the N900 too, since we really need to integrate
> > the omap3 to the common omap boot mechanism anyways.
> > 
> 
> Make sure that asm function in rx51 lowlevel asm file is called
> immediately from start.S. It is required. Basically no modification to
> that function should be needed (maybe just fixing return address in lr).
> 
> > I may be able to get my hands on a N900 in a short while.
> 
> Do you have n900 device? Or are you going to use qemu?
> 
> Really, for development u-boot for n900 is easier to use qemu as you can
> easier debug code...
> 
> > If you're interested, you're welcome to look at the issue and suggest
> > what changes should be made to make the set compatible with the N900!
> > 
> 
> Do not hide/mask/remove that required asm function. That should be all.
> 

And why is change to file board/nokia/rx51/lowlevel_init.S required?

-- 
Pali Roh?r
pali.rohar at gmail.com