From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 19 Jun 2015 16:25:15 -0400 Subject: [U-Boot] [U-Boot, v2] arm, am33xx: update for siemens am335x based boards In-Reply-To: <1434459574-13705-1-git-send-email-hs@denx.de> References: <1434459574-13705-1-git-send-email-hs@denx.de> Message-ID: <20150619202515.GD28577@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Jun 16, 2015 at 02:59:34PM +0200, Heiko Schocher wrote: > updates for the siemens am335x based boards: > > - draco: add delay for DDR3 configuration > - change MTD partition layout and add a possibility > to redefine MTD layout in board header. > - move ubi support to common header file > - draco: improve dtb naming > - draco: set CONFIG_SYS_CBSIZE to 1024 > - add generic env based led > Leds can now be defined in Environment > - add generic env based dfu button > Which gpio is used for the dfu button can be defined > through the Environment > - set MACH_TYPE only if defined > - draco: increase CPU freq to 300MHz > - Add time command to siemens am33xx boards > - DDR3: increase default tRFC > - draco: enable pullup for DFU and ERST pin > - change print format DDR3 > > Signed-off-by: Samuel Egli > Acked-by: Heiko Schocher > Reviewed-by: Tom Rini > > Signed-off-by: Heiko Schocher Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: