[U-Boot] [PATCH 1/3] imx: mx6 remove duplicated enable_cspi_clock

[Peng Fan <b51431@freescale.com>]

On Wed, Jun 24, 2015 at 12:53:40PM -0300, Fabio Estevam wrote:
>On Wed, Jun 24, 2015 at 7:44 AM, Peng Fan <Peng.Fan@freescale.com> wrote:
>> enable_spi_clock does the same thing with enable_cspi_clock.
>>
>> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
>> ---
>>  arch/arm/cpu/armv7/mx6/clock.c | 19 -------------------
>>  1 file changed, 19 deletions(-)
>>
>> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
>> index ae99945..1134770 100644
>> --- a/arch/arm/cpu/armv7/mx6/clock.c
>> +++ b/arch/arm/cpu/armv7/mx6/clock.c
>> @@ -102,25 +102,6 @@ void enable_uart_clk(unsigned char enable)
>>  }
>>  #endif
>>
>> -#ifdef CONFIG_SPI
>> -/* spi_num can be from 0 - 4 */
>> -int enable_cspi_clock(unsigned char enable, unsigned spi_num)
>> -{
>> -       u32 mask;
>> -
>> -       if (spi_num > 4)
>> -               return -EINVAL;
>> -
>> -       mask = MXC_CCM_CCGR_CG_MASK << (spi_num * 2);
>> -       if (enable)
>> -               setbits_le32(&imx_ccm->CCGR1, mask);
>> -       else
>> -               clrbits_le32(&imx_ccm->CCGR1, mask);
>> -
>> -       return 0;
>> -}
>> -#endif
>> -
>
>This patch causes board/compulab/cm_fx6/spl.c to fail to build.
>
>I see that you fix board/compulab/cm_fx6/spl.c in a later patch in
>your series, but it should be part of the same patch to avoid the
>build breakage.
>
I thought board and arch code should not be in one patch,
so I splitted it into two patch. Will fix it in v2.
>You should also remove the function prototype from
>arch/arm/include/asm/arch-mx6/clock.h.
Thanks for pointing this out. Will fix in v2.
>
>Regards,
>
>Fabio Estevam

Thanks,
Peng
--