[U-Boot] [PATCH 0/2] net: lpc32xx: add support to RMII phy

[Albert ARIBAUD (3ADEV) <albert.u.boot@3adev.fr>]

Hello Vladimir,

On Mon,  6 Jul 2015 07:22:09 +0300, Vladimir Zapolskiy <vz@mleia.com>
wrote:
> This is an update to LPC32xx MAC driver, which needs to have small
> quirks in order to properly work with an external phy connected by
> RMII interface.
> 
> RMII mode of MAC operation is selected, if CONFIG_RMII is defined,
> this option is aligned with a number of boards, which already have
> the same config value.
> 
> Also hopefully the first change from the series speeds up auto
> negotiation due to corrected configuration of MAC on intialization.
> 
> Tested with SMSC LAN8700 phy.
> 
> Vladimir Zapolskiy (2):
>   net: lpc32xx: improve MAC configuration on reset and initialization
>   net: lpc32xx: add RMII phy mode support

This series actually requires two other lpc32xx patches that you posted
earlier but which are not yet in u-boot/master or u-boot-arm/master:

	http://patchwork.ozlabs.org/patch/489100/
	http://patchwork.ozlabs.org/patch/489190/

In the future, please indicate when such a dependency is required, so
that testers know how to apply your patchs beforehand.

This point aside, I've tested the four patches above u-boot-arm/master
on a work_92105 target which has CONFIG_MII, and found no regression...
and a dramatic increase in TFTP throughput, so thanks. :)

(not adding my Tested-by because I don't want to mislead anyone: I
haven't tested RMII)

Amicalement,
-- 
Albert.