[U-Boot] [PATCH v2 3/4] usb: gadget: bcm_udc_otg files

[Lukasz Majewski <l.majewski@samsung.com>]

Hi Steve,

> From: "JD (Jiandong) Zheng" <jdzheng@broadcom.com>
> 
> Add the required files for the Broadcom UDC OTG interface.
> 
> Signed-off-by: Steve Rae <srae@broadcom.com>
> ---
> 
> Changes in v2: None
> 
>  arch/arm/include/asm/arch-bcm281xx/sysmap.h |  7 ++++
>  drivers/usb/gadget/bcm_udc_otg.h            | 17 ++++++++++
>  drivers/usb/gadget/bcm_udc_otg_phy.c        | 50
> +++++++++++++++++++++++++++++ 3 files changed, 74 insertions(+)
>  create mode 100644 drivers/usb/gadget/bcm_udc_otg.h
>  create mode 100644 drivers/usb/gadget/bcm_udc_otg_phy.c
> 
> diff --git a/arch/arm/include/asm/arch-bcm281xx/sysmap.h
> b/arch/arm/include/asm/arch-bcm281xx/sysmap.h index 93ebf34..dbcc88c
> 100644 --- a/arch/arm/include/asm/arch-bcm281xx/sysmap.h
> +++ b/arch/arm/include/asm/arch-bcm281xx/sysmap.h
> @@ -27,4 +27,11 @@
>  #define SECWD2_BASE_ADDR	0x35002f40
>  #define TIMER_BASE_ADDR		0x3e00d000
>  
> +#define HSOTG_DCTL_OFFSET
> 0x00000804 +#define
> HSOTG_DCTL_SFTDISCON_MASK				0x00000002 +
> +#define HSOTG_CTRL_PHY_P1CTL_OFFSET
> 0x00000008 +#define
> HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK
> 0x00000002 +#define
> HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK		0x00000001 +
> #endif diff --git a/drivers/usb/gadget/bcm_udc_otg.h
> b/drivers/usb/gadget/bcm_udc_otg.h new file mode 100644
> index 0000000..81a1fc0
> --- /dev/null
> +++ b/drivers/usb/gadget/bcm_udc_otg.h
> @@ -0,0 +1,17 @@
> +/*
> + * Copyright 2015 Broadcom Corporation.

--> Please also add the name of the code author.

> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#ifndef __BCM_UDC_OTG_H
> +#define __BCM_UDC_OTG_H
> +
> +#include <linux/types.h>
> +
> +#define wfld_set(addr, fld_val, fld_mask) \
> +		(writel(((readl(addr) & ~(fld_mask)) | (fld_val)),
> (addr))) +#define wfld_clear(addr, fld_mask) \
> +		(writel((readl(addr) & ~(fld_mask)), (addr)))

Maybe we could replace those preprocessor macros with static inline
functions?

> +
> +#endif
> diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c
> b/drivers/usb/gadget/bcm_udc_otg_phy.c new file mode 100644
> index 0000000..1aa9f91
> --- /dev/null
> +++ b/drivers/usb/gadget/bcm_udc_otg_phy.c
> @@ -0,0 +1,50 @@
> +/*
> + * Copyright 2015 Broadcom Corporation.

---> The same as above.

> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <config.h>
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/sysmap.h>
> +
> +#include <usb/s3c_udc.h>
> +#include "bcm_udc_otg.h"
> +
> +void otg_phy_init(struct s3c_udc *dev)
> +{
> +	/* set Phy to driving mode */
> +	wfld_clear(HSOTG_CTRL_BASE_ADDR +
> HSOTG_CTRL_PHY_P1CTL_OFFSET,
> +		   HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK);
> +
> +	udelay(100);
> +
> +	/* clear Soft Disconnect */
> +	wfld_clear(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET,
> +		   HSOTG_DCTL_SFTDISCON_MASK);
> +
> +	/* invoke Reset (active low) */
> +	wfld_clear(HSOTG_CTRL_BASE_ADDR +
> HSOTG_CTRL_PHY_P1CTL_OFFSET,
> +		   HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK);
> +
> +	udelay(10000);
	^^^^^^^^^^^^^^ -- would it be possible to add some comment
	regarding for what we are waiting here?
> +
> +	/* release Reset */
> +	wfld_set(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
> +		 HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK,
> +		 HSOTG_CTRL_PHY_P1CTL_SOFT_RESET_MASK);
> +}
> +
> +void otg_phy_off(struct s3c_udc *dev)
> +{
> +	/* Soft Disconnect */
> +	wfld_set(HSOTG_BASE_ADDR + HSOTG_DCTL_OFFSET,
> +		 HSOTG_DCTL_SFTDISCON_MASK,
> +		 HSOTG_DCTL_SFTDISCON_MASK);
> +
> +	/* set Phy to non-driving (reset) mode */
> +	wfld_set(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
> +		 HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK,
> +		 HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK);
> +}



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group