[U-Boot] [PATCH V2 03/15] imx: mx6ul: Update imx registers head file

[Peng Fan <b51431@freescale.com>]

Hi Marek,

On Sun, Jul 12, 2015 at 12:11:42AM +0200, Marek Vasut wrote:
>On Saturday, July 11, 2015 at 10:07:11 AM, Peng Fan wrote:
>> 1. Update imx register base address for i.MX6UL.
>> 2. Remove duplicated MXS_APBH/GPMI/BCH_BASE.
>> 3. Remove #ifdef for register addresses that equal to
>>    "AIPS2_OFF_BASE_ADDR + 0x34000" for different chips.
>> 4. According fuse map, complete fuse_bank4_regs.
>> 5. Move AIPS3_ARB_BASE_ADDR and AIPS3_ARB_END_ADDR out of #ifdef
>> CONFIG_MX6SX, because we can use runtime check
>> 
>> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
>> ---
>
>[...]
>
>> @@ -309,11 +311,16 @@
>>  #define PWM8_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xB0000)
>>  #endif
>> 
>> +/* only for i.MX6SX/UL */
>> +#define WDOG3_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL) ?		\
>> +			 (AIPS2_OFF_BASE_ADDR + 0x64000) :	\
>> +			 (AIPS3_ARB_BASE_ADDR + 0x88000))
>> +
>
>This might not work if used in assembler.

I did not see any scenario that it will be used in assembler now.
If we truely need it in assembler, then we can not avoid so many "ifdef"s.

>
>Best regards,
>Marek Vasut

Regards,
Peng.
--