[U-Boot] [PATCHv4 0/3] drivers/ddr/altera: Add the DDR controller driver for SoCFPGA

[Marek Vasut <marex@denx.de>]

On Friday, June 26, 2015 at 10:01:47 PM, Marek Vasut wrote:
> On Friday, June 26, 2015 at 06:43:13 PM, Marek Vasut wrote:
> > On Wednesday, June 03, 2015 at 05:52:47 AM,
> > dinguyen at opensource.altera.com
> > 
> > wrote:
> > > From: Dinh Nguyen <dinguyen@opensource.altera.com>
> > > 
> > > Hi,
> > > 
> > > This is v4 of the patch series that adds the DDR controller driver for
> > > Altera's SoCFPGA platform.
> > > 
> > > v4:
> > > - Further cleanup by removing comments that do not apply for Cyclone5.
> > > - Removed more unused functions
> > > 
> > > Thanks,
> > 
> > I applied this to u-boot/master and tried building for socfpga_cyclone5,
> > this is what I'm getting after I fixed these patches to actually apply
> > to u-boot/master (there was a minor conflict in Makefile):
> > 
> > drivers/ddr/altera/sdram.c:11:35: fatal error: asm/arch/sdram_config.h:
> > No such file or directory
> > 
> >  #include <asm/arch/sdram_config.h>
> 
> OK, these files were misplaced by the patch. Now I got it to compile, only
> to see that when I try to init DRAM on sockit using those, PHY calibration
> fails (run_mem_calibrate() returns 1).
> 
> btw. I also think sdram_config.h should go into board/altera/ instead .

Just a quick heads-up, I'm cleaning this and the SPL up. I got SoCkit
booting from SD/MMC and I'm over 50 patches now. I'll submit them when
I'm done with this. I'd like to avoid merge conflicts now, so please
wait for my submission if possible.

Best regards,
Marek Vasut