[U-Boot] [PATCH] Fix LS102xa timer setup to use 64-bit.

[Mark Rutland <mark.rutland@arm.com>]

On Sun, Jul 12, 2015 at 05:05:34AM +0100, Christopher Kilgour wrote:
> Fix LS102xa timer configuration to ensure timer compare value is set to
> all-ones as a 64-bit number rather than a 32-bit number.
> 
> When the 32-bit all-ones was used, this could result in a timer compare value
> of 2^32-1, which at 12.5 MHz will fire in ~344 seconds.  If the operating
> system's timer support does not expect or handle the timer compare, it can
> lock up when the timer compare fires and never clears (in Linux this shows up
> as a stuck GIC 29).
> 
> It's also possible to interactively work with u-boot for longer than 344
> seconds, and have the timer compare silently fire in the background without
> impact on u-boot operation.  However, as soon as the operating system enables
> interrupts, it can lock up.  On embedded Linux without early console support,
> this can be a silent lockup without warning or diagnostic output.
> 
> It's likely Freescale wanted to set the timer compare to the largest possible
> value of all-ones at 64-bits.  Rather than 344 seconds, this would fire after
> ~47k years.  Even though Linux systems are known for long uptimes, one assumes
> this is Freescale's intended, safe value.

It would probably be better to set CNTP_CTL.IMASK, or clear
CNTP_CTL.ENABLE. That way no interrupt will be generated regardless of
the timer frequency, even in the case of a long uptime ;)

Thanks,
Mark.

> 
> Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
> Cc: York Sun <yorksun@freescale.com>
> ---
>  arch/arm/cpu/armv7/ls102xa/timer.c                | 7 ++++---
>  arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 2 +-
>  2 files changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
> index 11b17b2..746bfc0 100644
> --- a/arch/arm/cpu/armv7/ls102xa/timer.c
> +++ b/arch/arm/cpu/armv7/ls102xa/timer.c
> @@ -56,7 +56,8 @@ static inline unsigned long long us_to_tick(unsigned long long usec)
>  int timer_init(void)
>  {
>  	struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
> -	unsigned long ctrl, val, freq;
> +	unsigned long ctrl, freq;
> +	unsigned long long val64;
>  
>  	/* Enable System Counter */
>  	writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
> @@ -69,8 +70,8 @@ int timer_init(void)
>  	asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
>  
>  	/* Set PL1 Physical Comp Value */
> -	val = TIMER_COMP_VAL;
> -	asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val));
> +	val64 = TIMER_COMP_VAL;
> +	asm("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val64));
>  
>  	gd->arch.tbl = 0;
>  	gd->arch.tbu = 0;
> diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> index ee547fb..1f55655 100644
> --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> @@ -31,7 +31,7 @@
>  #define RCWSR4_SRDS1_PRTCL_SHIFT	24
>  #define RCWSR4_SRDS1_PRTCL_MASK		0xff000000
>  
> -#define TIMER_COMP_VAL			0xffffffff
> +#define TIMER_COMP_VAL			((unsigned long long)(-1))
>  #define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
>  #define SYS_COUNTER_CTRL_ENABLE		(1 << 24)
>  
> -- 
> 2.1.0
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>