public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Lukasz Majewski <l.majewski@majess.pl>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/8] dfu: tftp: update: Provide tftp support for the DFU subsystem
Date: Thu, 16 Jul 2015 22:06:07 +0200	[thread overview]
Message-ID: <20150716220607.7ea71d9b@jawa> (raw)
In-Reply-To: <CANr=Z=YZE-9wgZbnCEVrteFbB7hBByChkPZ79zk3P6KavGrT_A@mail.gmail.com>

Hi Joe,

> Hi Lukasz,
> 
> On Sun, Jul 12, 2015 at 10:30 AM, Lukasz Majewski
> <l.majewski@majess.pl> wrote:
> > This commit adds initial support for using tftp for downloading and
> > upgrading firmware on the device.
> >
> > Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
> > ---
> >  drivers/dfu/Makefile   |  1 +
> >  drivers/dfu/dfu_tftp.c | 76
> > ++++++++++++++++++++++++++++++++++++++++++++++++++
> > include/dfu.h          | 11 ++++++++ 3 files changed, 88
> > insertions(+) create mode 100644 drivers/dfu/dfu_tftp.c
> >
> > diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
> > index 5cc535e..43249ce 100644
> > --- a/drivers/dfu/Makefile
> > +++ b/drivers/dfu/Makefile
> > @@ -10,3 +10,4 @@ obj-$(CONFIG_DFU_MMC) += dfu_mmc.o
> >  obj-$(CONFIG_DFU_NAND) += dfu_nand.o
> >  obj-$(CONFIG_DFU_RAM) += dfu_ram.o
> >  obj-$(CONFIG_DFU_SF) += dfu_sf.o
> > +obj-$(CONFIG_DFU_TFTP) += dfu_tftp.o
> > diff --git a/drivers/dfu/dfu_tftp.c b/drivers/dfu/dfu_tftp.c
> > new file mode 100644
> > index 0000000..26539f2
> > --- /dev/null
> > +++ b/drivers/dfu/dfu_tftp.c
> > @@ -0,0 +1,76 @@
> > +/*
> > + * (C) Copyright 2015
> > + * Lukasz Majewski <l.majewski@majess.pl>
> > + *
> > + * SPDX-License-Identifier:    GPL-2.0+
> > + */
> > +
> > +#include <common.h>
> > +#include <malloc.h>
> > +#include <errno.h>
> > +#include <dfu.h>
> > +
> > +int dfu_tftp_write(char *dfu_entity_name, unsigned int addr,
> > unsigned int len) +{
> > +       char *s, *sb, *interface, *devstring;
> > +       int alt_setting_num, ret;
> > +       struct dfu_entity *dfu;
> > +
> > +       debug("%s: name: %s addr: 0x%x len: %d\n", __func__,
> > dfu_entity_name,
> > +             addr, len);
> > +
> > +       interface = getenv("update_tftp_dfu_interface");
> > +       if (interface == NULL) {
> > +               error("TFTP DFU: 'interface' not defined\n");
> > +               return -EINVAL;
> > +       }
> > +
> > +       devstring = getenv("update_tftp_dfu_devstring");
> > +       if (devstring == NULL) {
> > +               error("TFTP DFU: 'devstring' not defined\n");
> > +               return -EINVAL;
> > +       }
> 
> It would be great if these env vars could be moved to command
> parameters.

Those parameters are necessary to perform update (via update_tftp())
during boot time.

Normally - when user call 'dfutftp' command he/she needs to specify
this informaiton. (e.g. 'dfutftp 0 mmc 1').

> 
> > +
> > +       ret = dfu_init_env_entities(interface, devstring);
> > +       if (ret)
> > +               goto done;
> > +
> > +       /*
> > +        * We need to copy name pointed by *dfu_entity_name since
> > this text
> > +        * is the integral part of the FDT image.
> > +        * Any implicit modification (i.e. done by strsep()) will
> > corrupt
> > +        * the FDT image and prevent other images to be stored.
> > +        */
> > +       s = strdup(dfu_entity_name);
> > +       sb = s;
> > +       if (!s) {
> > +               ret = -ENOMEM;
> > +               goto done;
> > +       }
> > +
> > +       strsep(&s, "@");
> > +       debug("%s: image name: %s strlen: %d\n", __func__, sb,
> > strlen(sb)); +
> > +       alt_setting_num = dfu_get_alt(sb);
> > +       free(sb);
> > +       if (alt_setting_num < 0) {
> > +               error("Alt setting [%d] to write not found!",
> > +                     alt_setting_num);
> > +               ret = -ENODEV;
> > +               goto done;
> > +       }
> > +
> > +       dfu = dfu_get_entity(alt_setting_num);
> > +       if (!dfu) {
> > +               error("DFU entity for alt: %d not found!",
> > alt_setting_num);
> > +               ret = -ENODEV;
> > +               goto done;
> > +       }
> > +
> > +       ret = dfu_write_from_mem_addr(dfu, (void *)addr, len);
> > +
> > +done:
> > +       dfu_free_entities();
> > +
> > +       return ret;
> > +}
> > diff --git a/include/dfu.h b/include/dfu.h
> > index 7d31abd..adad863 100644
> > --- a/include/dfu.h
> > +++ b/include/dfu.h
> > @@ -207,5 +207,16 @@ static inline int dfu_fill_entity_sf(struct
> > dfu_entity *dfu, char *devstr, }
> >  #endif
> >
> > +#ifdef CONFIG_DFU_TFTP
> > +int dfu_tftp_write(char *dfu_entity_name, unsigned int addr,
> > unsigned int len); +#else
> > +static inline int dfu_tftp_write(char *dfu_entity_name, unsigned
> > int addr,
> > +                                unsigned int len)
> > +{
> > +       puts("TFTP write support for DFU not available!\n");
> > +       return -1;
> 
> This should be -ENOSYS probably.

Good point - thanks!

> 
> > +}
> > +#endif
> > +
> >  int dfu_add(struct usb_configuration *c);
> >  #endif /* __DFU_ENTITY_H_ */
> > --
> > 2.1.4
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot

Best regards,
Lukasz Majewski
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150716/e0afce0c/attachment.sig>

  reply	other threads:[~2015-07-16 20:06 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-12 15:30 [U-Boot] [PATCH 0/8] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP) Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 1/8] doc: dfu: tftp: README entry for TFTP extension of DFU Lukasz Majewski
2015-07-15 18:14   ` Joe Hershberger
2015-07-16 19:59     ` Lukasz Majewski
2015-07-17 19:28       ` Joe Hershberger
2015-07-20 18:59         ` Lukasz Majewski
2015-07-20 19:17           ` Joe Hershberger
2015-07-20 20:09             ` Tormod Volden
2015-07-21 21:55             ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 2/8] net: tftp: Move tftp.h file from ./net to ./include Lukasz Majewski
2015-07-15 18:17   ` Joe Hershberger
2015-07-16 20:02     ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 3/8] tftp: update: Allow some parts of the code to be reused when CONFIG_SYS_NO_FLASH is set Lukasz Majewski
2015-07-15 18:19   ` Joe Hershberger
2015-07-12 15:30 ` [U-Boot] [PATCH 4/8] dfu: tftp: update: Provide tftp support for the DFU subsystem Lukasz Majewski
2015-07-15 18:24   ` Joe Hershberger
2015-07-16 20:06     ` Lukasz Majewski [this message]
2015-07-17 19:35       ` Joe Hershberger
2015-07-20 19:03         ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 5/8] dfu: tftp: update: Add dfu_write_from_mem_addr() function Lukasz Majewski
2015-07-15 18:33   ` Joe Hershberger
2015-07-16 20:07     ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 6/8] update: tftp: dfu: Extend update_tftp() function to support DFU Lukasz Majewski
2015-07-15 18:35   ` Joe Hershberger
2015-07-16 20:11     ` Lukasz Majewski
2015-07-17 19:38       ` Joe Hershberger
2015-07-20 19:05         ` Lukasz Majewski
2015-07-12 15:30 ` [U-Boot] [PATCH 7/8] dfu: command: Provide support for 'dfutftp' command to handle receiving data via TFTP Lukasz Majewski
2015-07-15 18:39   ` Joe Hershberger
2015-07-16 20:26     ` Lukasz Majewski
2015-07-17 19:40       ` Joe Hershberger
2015-07-20 17:59         ` Lukasz Majewski
2015-07-20 18:11           ` Joe Hershberger
2015-07-12 15:30 ` [U-Boot] [PATCH 8/8] config: bbb: Configs necessary for running update via TFTP on Beagle Bone Black Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150716220607.7ea71d9b@jawa \
    --to=l.majewski@majess.pl \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox