From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Sat, 18 Jul 2015 00:09:46 +0200 Subject: [U-Boot] [PATCH 0/3] lpc32xx: add legacy NXP BSP drivers In-Reply-To: <1437166134-21204-1-git-send-email-slemieux.tyco@gmail.com> References: <1437166134-21204-1-git-send-email-slemieux.tyco@gmail.com> Message-ID: <201507180009.46749.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday, July 17, 2015 at 10:48:51 PM, slemieux.tyco at gmail.com wrote: > From: Sylvain Lemieux > > This series of patches bring the legacy NXP LPC32xx BSP > drivers (SLC NAND, DMA & USB) into the latest u-boot. > > Refer to each individual patches for details on the change done to > integrate the driver into the latest u-boot. > > The legacy BSP patch (u-boot-2009.03_lpc32x0-v1.07.patch.tar.bz2) > was downloaded from the LPCLinux Web site. > > The patch adding the LPC32xx MAC and SMSC RMII phy support > should be applied first: > - http://patchwork.ozlabs.org/patch/489100/ > - http://patchwork.ozlabs.org/patch/489190/ > - http://patchwork.ozlabs.org/patch/491419/ > - http://patchwork.ozlabs.org/patch/491420/ > > The SLC NAND patch is conflicting with the following patch sent > on the mailing list: > - https://patchwork.ozlabs.org/patch/496017/ > > The ported implementation of the SLC NAND driver from the legacy > NXP BSP support the hardware ECC. > > Note: > I am sending the patches using , > until I can submit patch using my regular e-mail . Will there ever be LPC810 support in U-Boot ? :-) Best regards, Marek Vasut