[U-Boot] [PATCH 0/3] lpc32xx: add legacy NXP BSP drivers

[U-Boot] [PATCH 0/3] lpc32xx: add legacy NXP BSP drivers

[slemieux.tyco at gmail.com]

From: Sylvain Lemieux <slemieux@tycoint.com>

This series of patches bring the legacy NXP LPC32xx BSP
drivers (SLC NAND, DMA & USB) into the latest u-boot.

Refer to each individual patches for details on the change done to
integrate the driver into the latest u-boot.

The legacy BSP patch (u-boot-2009.03_lpc32x0-v1.07.patch.tar.bz2)
was downloaded from the LPCLinux Web site.

The patch adding the LPC32xx MAC and SMSC RMII phy support
should be applied first:
- http://patchwork.ozlabs.org/patch/489100/
- http://patchwork.ozlabs.org/patch/489190/
- http://patchwork.ozlabs.org/patch/491419/
- http://patchwork.ozlabs.org/patch/491420/

The SLC NAND patch is conflicting with the following patch sent
on the mailing list:
- https://patchwork.ozlabs.org/patch/496017/

The ported implementation of the SLC NAND driver from the legacy
NXP BSP support the hardware ECC. 

Note:
I am sending the patches using <slemieux.tyco@gmail.com>,
until I can submit patch using my regular e-mail <slemieux@tycoint.com>.

Sylvain Lemieux (3):
  nand: lpc32xx: add SLC NAND driver
  dma: lpc32xx: add DMA driver
  usb: lpc32xx: add host USB driver

 arch/arm/cpu/arm926ejs/lpc32xx/devices.c      |  12 +
 arch/arm/include/asm/arch-lpc32xx/clk.h       |  17 +
 arch/arm/include/asm/arch-lpc32xx/dma.h       |  33 ++
 arch/arm/include/asm/arch-lpc32xx/sys_proto.h |   2 +
 drivers/dma/Makefile                          |   1 +
 drivers/dma/lpc32xx_dma.c                     | 153 ++++++++
 drivers/mtd/nand/Makefile                     |   1 +
 drivers/mtd/nand/lpc32xx_nand_slc.c           | 501 ++++++++++++++++++++++++++
 drivers/usb/host/Makefile                     |   1 +
 drivers/usb/host/ohci-lpc32xx.c               | 304 ++++++++++++++++
 10 files changed, 1025 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-lpc32xx/dma.h
 create mode 100644 drivers/dma/lpc32xx_dma.c
 create mode 100644 drivers/mtd/nand/lpc32xx_nand_slc.c
 create mode 100644 drivers/usb/host/ohci-lpc32xx.c

-- 
1.8.3.1

[U-Boot] [PATCH 0/3] lpc32xx: add legacy NXP BSP drivers

[Marek Vasut]

On Friday, July 17, 2015 at 10:48:51 PM, slemieux.tyco at gmail.com wrote:
> From: Sylvain Lemieux <slemieux@tycoint.com>
> 
> This series of patches bring the legacy NXP LPC32xx BSP
> drivers (SLC NAND, DMA & USB) into the latest u-boot.
> 
> Refer to each individual patches for details on the change done to
> integrate the driver into the latest u-boot.
> 
> The legacy BSP patch (u-boot-2009.03_lpc32x0-v1.07.patch.tar.bz2)
> was downloaded from the LPCLinux Web site.
> 
> The patch adding the LPC32xx MAC and SMSC RMII phy support
> should be applied first:
> - http://patchwork.ozlabs.org/patch/489100/
> - http://patchwork.ozlabs.org/patch/489190/
> - http://patchwork.ozlabs.org/patch/491419/
> - http://patchwork.ozlabs.org/patch/491420/
> 
> The SLC NAND patch is conflicting with the following patch sent
> on the mailing list:
> - https://patchwork.ozlabs.org/patch/496017/
> 
> The ported implementation of the SLC NAND driver from the legacy
> NXP BSP support the hardware ECC.
> 
> Note:
> I am sending the patches using <slemieux.tyco@gmail.com>,
> until I can submit patch using my regular e-mail <slemieux@tycoint.com>.

Will there ever be LPC810 support in U-Boot ? :-)

Best regards,
Marek Vasut