[U-Boot] [PATCH 1/3] ARM: at91: add cpu.h

[Marek Vasut <marex@denx.de>]

On Monday, June 15, 2015 at 02:42:59 PM, Heiko Schocher wrote:
> add cpu.h from linux:
> 
> 7538ec7d1e5: ARM: at91: remove no-MMU at91x40 support
> 
> so it is easier to port linux code, which is based on it.
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
> 
>  arch/arm/mach-at91/include/mach/cpu.h | 149
> ++++++++++++++++++++++++++++++++++ 1 file changed, 149 insertions(+)
>  create mode 100644 arch/arm/mach-at91/include/mach/cpu.h
> 
> diff --git a/arch/arm/mach-at91/include/mach/cpu.h
> b/arch/arm/mach-at91/include/mach/cpu.h new file mode 100644
> index 0000000..a5e698d
> --- /dev/null
> +++ b/arch/arm/mach-at91/include/mach/cpu.h
> @@ -0,0 +1,149 @@
> +/*
> + * from linux:
> + * 7538ec7d1e5: ARM: at91: remove no-MMU at91x40 support
> + *
> + * arch/arm/mach-at91/include/mach/cpu.h
> + *
> + * Copyright (C) 2006 SAN People
> + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + *
> + */
> +
> +#ifndef __AT91_MACH_CPU_H__
> +#define __AT91_MACH_CPU_H__
> +
> +#ifdef CONFIG_AT91RM9200
> +#define cpu_is_at91rm9200()	(1)
> +#else
> +#define cpu_is_at91rm9200()	(0)
> +#endif

The () are not needed .

Best regards,
Marek Vasut