From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Tue, 21 Jul 2015 09:02:48 +0200 Subject: [U-Boot] [PATCH 3/3] at91, taurus, smartweb: add dfu support In-Reply-To: <1434372182-8967-4-git-send-email-hs@denx.de> References: <1434372182-8967-1-git-send-email-hs@denx.de> <1434372182-8967-4-git-send-email-hs@denx.de> Message-ID: <20150721090248.4a7d0fba@amdc2363> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Heiko, > [root at pollux dfu-util]# ./src/dfu-util -l > dfu-util 0.8 > > Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. > Copyright 2010-2014 Tormod Volden and Stefan Schmidt > This program is Free Software and has ABSOLUTELY NO WARRANTY > Please report bugs to dfu-util at lists.gnumonks.org > > Found DFU: [0908:02d2] ver=0212, devnum=119, cfg=1, intf=0, alt=0, > name="Linux", serial="UNKNOWN" [root at pollux dfu-util]# > > Signed-off-by: Heiko Schocher > --- > > board/siemens/smartweb/smartweb.c | 29 +++++++++++++++++++++++++++++ > board/siemens/taurus/taurus.c | 27 +++++++++++++++++++++++++++ > include/configs/smartweb.h | 34 > ++++++++++++++++++++++++++++++---- include/configs/taurus.h > | 28 +++++++++++++++++++++++++++- 4 files changed, 113 insertions(+), > 5 deletions(-) > > diff --git a/board/siemens/smartweb/smartweb.c > b/board/siemens/smartweb/smartweb.c index cf8a7f5..2d42488 100644 > --- a/board/siemens/smartweb/smartweb.c > +++ b/board/siemens/smartweb/smartweb.c > @@ -25,6 +25,7 @@ > #include > #include > #include > +#include > #include > #include > #ifdef CONFIG_MACB > @@ -108,6 +109,29 @@ static void smartweb_macb_hw_init(void) > } > #endif /* CONFIG_MACB */ > > +#ifdef CONFIG_USB_GADGET_AT91 > +#include > + > +void at91_udp_hw_init(void) > +{ > + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; > + > + /* Enable PLLB */ > + writel(get_pllb_init(), &pmc->pllbr); > + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) > + ; > + > + /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ > + at91_periph_clk_enable(ATMEL_ID_UDP); > + > + writel(AT91SAM926x_PMC_UDP, &pmc->scer); > +} > + > +struct at91_udc_data board_udc_data = { > + .baseaddr = ATMEL_BASE_UDP0, > +}; > +#endif > + > int board_early_init_f(void) > { > /* enable this here, as we have SPL without serial support */ > @@ -134,6 +158,11 @@ int board_init(void) > at91_set_gpio_output(AT91_PIN_PC10, 0); > at91_set_gpio_output(AT91_PIN_PC11, 1); > > +#ifdef CONFIG_USB_GADGET_AT91 > + at91_udp_hw_init(); > + at91_udc_probe(&board_udc_data); > +#endif > + > return 0; > } > > diff --git a/board/siemens/taurus/taurus.c > b/board/siemens/taurus/taurus.c index d10411c..54f67da 100644 > --- a/board/siemens/taurus/taurus.c > +++ b/board/siemens/taurus/taurus.c > @@ -272,6 +272,29 @@ void spi_cs_deactivate(struct spi_slave *slave) > at91_set_gpio_value(TAURUS_SPI_CS_PIN, 1); > } > > +#ifdef CONFIG_USB_GADGET_AT91 > +#include > + > +void at91_udp_hw_init(void) > +{ > + at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; > + > + /* Enable PLLB */ > + writel(get_pllb_init(), &pmc->pllbr); > + while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) > + ; > + > + /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ > + at91_periph_clk_enable(ATMEL_ID_UDP); > + > + writel(AT91SAM926x_PMC_UDP, &pmc->scer); > +} > + > +struct at91_udc_data board_udc_data = { > + .baseaddr = ATMEL_BASE_UDP0, > +}; > +#endif > + > int board_init(void) > { > /* adress of boot parameters */ > @@ -284,6 +307,10 @@ int board_init(void) > taurus_macb_hw_init(); > #endif > at91_spi0_hw_init(TAURUS_SPI_MASK); > +#ifdef CONFIG_USB_GADGET_AT91 > + at91_udp_hw_init(); > + at91_udc_probe(&board_udc_data); > +#endif > > return 0; > } > diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h > index 9f22139..baec73b 100644 > --- a/include/configs/smartweb.h > +++ b/include/configs/smartweb.h > @@ -75,7 +75,7 @@ > > /* Size of malloc() pool */ > #define CONFIG_SYS_MALLOC_LEN \ > - ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000) > + ROUND(3 * CONFIG_ENV_SIZE + 4*1024*1024, 0x1000) > > /* NAND flash settings */ > #define CONFIG_NAND_ATMEL > @@ -140,15 +140,42 @@ > > #if !defined(CONFIG_SPL_BUILD) > /* USB configuration */ > +#define CONFIG_CMD_USB > #define CONFIG_USB_ATMEL > #define CONFIG_USB_ATMEL_CLK_SEL_PLLB > #define CONFIG_USB_OHCI_NEW > -#define CONFIG_USB_STORAGE > -#define CONFIG_DOS_PARTITION > #define CONFIG_SYS_USB_OHCI_CPU_INIT > #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE > #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" > #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 > + > +#define CONFIG_USB_HOST_ETHER > +#define CONFIG_USB_ETHER_ASIX > +#define CONFIG_USB_ETHER_MCS7830 > + > +/* USB DFU support */ > +#define CONFIG_CMD_MTDPARTS > +#define CONFIG_MTD_DEVICE > +#define CONFIG_MTD_PARTITIONS > + > +#define CONFIG_USB_GADGET > +#define CONFIG_USB_GADGET_AT91 > + > +/* DFU class support */ > +#define CONFIG_CMD_DFU > +#define CONFIG_DFU_FUNCTION > +#define CONFIG_DFU_NAND > +#define CONFIG_USBDOWNLOAD_GADGET > +#define CONFIG_USB_GADGET_VBUS_DRAW 2 > +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) > +#define DFU_MANIFEST_POLL_TIMEOUT 25000 > + > +/* USB DFU IDs */ > +#define CONFIG_G_DNL_VENDOR_NUM 0x0908 > +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 > +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" > + > +#define CONFIG_SYS_CACHELINE_SIZE 0x2000 > #endif > > /* General Boot Parameter */ > @@ -195,7 +222,6 @@ > #undef CONFIG_CMD_LOADS > > #define CONFIG_CMD_NAND > -#define CONFIG_CMD_USB > #define CONFIG_CMD_FAT > > #ifdef CONFIG_MACB > diff --git a/include/configs/taurus.h b/include/configs/taurus.h > index dd35a8f..99cf302 100644 > --- a/include/configs/taurus.h > +++ b/include/configs/taurus.h > @@ -128,12 +128,38 @@ > /* USB */ > #if defined(CONFIG_BOARD_TAURUS) > #define CONFIG_USB_ATMEL > +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB > #define CONFIG_USB_OHCI_NEW > #define CONFIG_SYS_USB_OHCI_CPU_INIT > #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 > #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" > #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 > #define CONFIG_USB_STORAGE > + > +/* USB DFU support */ > +#define CONFIG_CMD_MTDPARTS > +#define CONFIG_MTD_DEVICE > +#define CONFIG_MTD_PARTITIONS > + > +#define CONFIG_USB_GADGET > +#define CONFIG_USB_GADGET_AT91 > + > +/* DFU class support */ > +#define CONFIG_CMD_USB > +#define CONFIG_CMD_DFU > +#define CONFIG_DFU_FUNCTION > +#define CONFIG_DFU_NAND > +#define CONFIG_USBDOWNLOAD_GADGET > +#define CONFIG_USB_GADGET_VBUS_DRAW 2 > +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) ^^^^^^^^^ Here you can use SZ_1M Please correct other places where you can replace (1 << X) with SZ_X. > +#define DFU_MANIFEST_POLL_TIMEOUT 25000 > + > +/* USB DFU IDs */ > +#define CONFIG_G_DNL_VENDOR_NUM 0x0908 > +#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2 > +#define CONFIG_G_DNL_MANUFACTURER "Siemens AG" > + > +#define CONFIG_SYS_CACHELINE_SIZE 0x2000 > #endif > > /* SPI EEPROM */ > @@ -251,7 +277,7 @@ > * Size of malloc() pool > */ > #define CONFIG_SYS_MALLOC_LEN \ > - ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) > + ROUND(3 * CONFIG_ENV_SIZE + 4*1024*1024, 0x1000) > > /* Defines for SPL */ > #define CONFIG_SPL_FRAMEWORK -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group