public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@piout.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/3] ARM: at91: add cpu.h
Date: Wed, 22 Jul 2015 16:40:14 +0200	[thread overview]
Message-ID: <20150722143233.GG2853@piout.net> (raw)
In-Reply-To: <1434372182-8967-2-git-send-email-hs@denx.de>

Hi,

On 15/06/2015 at 14:42:59 +0200, Heiko Schocher wrote :
> add cpu.h from linux:
> 
> 7538ec7d1e5: ARM: at91: remove no-MMU at91x40 support
> 
> so it is easier to port linux code, which is based on it.
> 

That file doesn't exist anymore, see
f56d8f7c29320abe6f923fa1b3cb7adcc3252a24 and I think the cpu_is_xxx removal
was finished a few linux versions ago so you should not need that.

> Signed-off-by: Heiko Schocher <hs@denx.de>
> ---
> 
>  arch/arm/mach-at91/include/mach/cpu.h | 149 ++++++++++++++++++++++++++++++++++
>  1 file changed, 149 insertions(+)
>  create mode 100644 arch/arm/mach-at91/include/mach/cpu.h
> 
> diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
> new file mode 100644
> index 0000000..a5e698d
> --- /dev/null
> +++ b/arch/arm/mach-at91/include/mach/cpu.h
> @@ -0,0 +1,149 @@
> +/*
> + * from linux:
> + * 7538ec7d1e5: ARM: at91: remove no-MMU at91x40 support
> + *
> + * arch/arm/mach-at91/include/mach/cpu.h
> + *
> + * Copyright (C) 2006 SAN People
> + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + *
> + */
> +
> +#ifndef __AT91_MACH_CPU_H__
> +#define __AT91_MACH_CPU_H__
> +
> +#ifdef CONFIG_AT91RM9200
> +#define cpu_is_at91rm9200()	(1)
> +#else
> +#define cpu_is_at91rm9200()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9260
> +#define cpu_is_at91sam9260()	(1)
> +#else
> +#define cpu_is_at91sam9260()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G20
> +#define cpu_is_at91sam9g20()	(1)
> +#else
> +#define cpu_is_at91sam9g20()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9XE
> +#define cpu_is_at91sam9xe()	(1)
> +#else
> +#define cpu_is_at91sam9xe()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9261
> +#define cpu_is_at91sam9261()	(1)
> +#else
> +#define cpu_is_at91sam9261()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G10
> +#define cpu_is_at91sam9g10()	(1)
> +#else
> +#define cpu_is_at91sam9g10()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9263
> +#define cpu_is_at91sam9263()	(1)
> +#else
> +#define cpu_is_at91sam9263()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9RL
> +#define cpu_is_at91sam9rl()	(1)
> +#else
> +#define cpu_is_at91sam9rl()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G45
> +#define cpu_is_at91sam9g45()	(1)
> +#else
> +#define cpu_is_at91sam9g45()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G45ES
> +#define cpu_is_at91sam9g45es()	(1)
> +#else
> +#define cpu_is_at91sam9g45es()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9M10
> +#define cpu_is_at91sam9m10()	(1)
> +#else
> +#define cpu_is_at91sam9m10()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G46
> +#define cpu_is_at91sam9g46()	(1)
> +#else
> +#define cpu_is_at91sam9g46()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9M11
> +#define cpu_is_at91sam9m11()	(1)
> +#else
> +#define cpu_is_at91sam9m11()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9X5
> +#define cpu_is_at91sam9x5()	(1)
> +#else
> +#define cpu_is_at91sam9x5()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G15
> +#define cpu_is_at91sam9g15()	(1)
> +#else
> +#define cpu_is_at91sam9g15()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G35
> +#define cpu_is_at91sam9g35()	(1)
> +#else
> +#define cpu_is_at91sam9g35()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9X35
> +#define cpu_is_at91sam9x35()	(1)
> +#else
> +#define cpu_is_at91sam9x35()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9G25
> +#define cpu_is_at91sam9g25()	(1)
> +#else
> +#define cpu_is_at91sam9g25()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9X25
> +#define cpu_is_at91sam9x25()	(1)
> +#else
> +#define cpu_is_at91sam9x25()	(0)
> +#endif
> +
> +#ifdef CONFIG_AT91SAM9N12
> +#define cpu_is_at91sam9n12()	(1)
> +#else
> +#define cpu_is_at91sam9n12()	(0)
> +#endif
> +
> +#ifdef CONFIG_SAMA5D3
> +#define cpu_is_sama5d3()	(1)
> +#else
> +#define cpu_is_sama5d3()	(0)
> +#endif
> +
> +#ifdef CONFIG_SAMA5D4
> +#define cpu_is_sama5d4()	(1)
> +#else
> +#define cpu_is_sama5d4()	(0)
> +#endif
> +
> +#endif
> -- 
> 2.1.0
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 

-- 
Alexandre Belloni

  parent reply	other threads:[~2015-07-22 14:40 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-15 12:42 [U-Boot] [PATCH 0/3] add dfu support for at91 sam9260 based boards Heiko Schocher
2015-06-15 12:42 ` [U-Boot] [PATCH 1/3] ARM: at91: add cpu.h Heiko Schocher
2015-07-21  1:59   ` Marek Vasut
2015-07-22 14:40   ` Alexandre Belloni [this message]
2015-06-15 12:43 ` [U-Boot] [PATCH 2/3] usb: gadget: at91_udc: add support for at91_udc Heiko Schocher
2015-07-21  6:59   ` Lukasz Majewski
2015-08-10  5:16     ` Heiko Schocher
2015-06-15 12:43 ` [U-Boot] [PATCH 3/3] at91, taurus, smartweb: add dfu support Heiko Schocher
2015-07-21  2:02   ` Marek Vasut
2015-07-21  7:02   ` Lukasz Majewski
2015-07-20 14:03 ` [U-Boot] [PATCH 0/3] add dfu support for at91 sam9260 based boards Lukasz Majewski
2015-07-20 15:20   ` Heiko Schocher
2015-07-21  5:36     ` Lukasz Majewski
2015-07-21  2:03   ` Marek Vasut
2015-08-10  5:14     ` Heiko Schocher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150722143233.GG2853@piout.net \
    --to=alexandre.belloni@piout.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox