From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Tue, 28 Jul 2015 10:58:05 -0400 Subject: [U-Boot] config: ti_omap5_common: Palmas power support in SPL In-Reply-To: <1435789225-7466-1-git-send-email-contact@paulk.fr> References: <1435789225-7466-1-git-send-email-contact@paulk.fr> Message-ID: <20150728145805.GD25532@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Jul 02, 2015 at 12:20:25AM +0200, Paul Kocialkowski wrote: > Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that > need to e.g. enable MMC power at SPL stage. > > This is especially important when booting from a peripheral (such as USB, UART), > where the bootrom will not enable power for the MMC device that will hold the > main U-Boot. > > Signed-off-by: Paul Kocialkowski > Reviewed-by: Tom Rini Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: