[U-Boot] [PATCH 2/5] power: regulator use node name when no regulator-name

[Peng Fan <b51431@freescale.com>]

Hello Przemyslaw,
On Mon, Aug 03, 2015 at 05:00:50PM +0200, Przemyslaw Marczak wrote:
>Hello,
>
>On 08/03/2015 02:23 AM, Peng Fan wrote:
>>Hi Simon,
>>
>>On Sun, Aug 02, 2015 at 04:31:06PM -0600, Simon Glass wrote:
>>>Hi Peng,
>>>
>>>On 28 July 2015 at 08:48, Peng Fan <Peng.Fan@freescale.com> wrote:
>>>>If there is no property named 'regulator-name' for regulators,
>>>>choose node name instead, but not directly return failure value.
>>>>
>>>>Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
>>>>Cc: Przemyslaw Marczak <p.marczak@samsung.com>
>>>>Cc: Simon Glass <sjg@chromium.org>
>>>>---
>>>>  drivers/power/regulator/regulator-uclass.c | 4 +++-
>>>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>>>
>>>>diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c
>>>>index 12e141b..d4f06d5 100644
>>>>--- a/drivers/power/regulator/regulator-uclass.c
>>>>+++ b/drivers/power/regulator/regulator-uclass.c
>>>>@@ -256,7 +256,9 @@ static int regulator_post_bind(struct udevice *dev)
>>>>         if (!uc_pdata->name) {
>>>>                 debug("%s: dev: %s has no property 'regulator-name'\n",
>>>>                       __func__, dev->name);
>>>>-               return -EINVAL;
>>>>+               uc_pdata->name = fdt_get_name(blob, offset, NULL);
>>>>+               if (!uc_pdata->name)
>>>>+                       return -EINVAL;
>>>>         }
>>>>
>>>>         if (regulator_name_is_unique(dev, uc_pdata->name))
>>>>--
>>>>1.8.4
>>>>
>>>>
>>>
>>>What is this for please? Can you point me to the device tree binding
>>>that needs this? I suspect it is fine, but I would like to understand
>>>the purpose.
>>
>>The regulator device tree is as following:
>>
>>        regulators {
>>	   	sw1a_reg: sw1a {
>>	   		regulator-min-microvolt = <700000>;
>>	   		regulator-max-microvolt = <1475000>;
>>	   		regulator-boot-on;
>>	   		regulator-always-on;
>>	   		regulator-ramp-delay = <6250>;
>>	   	};
>>	   		
>>	   		/* use sw1c_reg to align with pfuze100/pfuze200 */
>>	   	sw1c_reg: sw1b {
>>	   		regulator-min-microvolt = <700000>;
>>	   		regulator-max-microvolt = <1475000>;
>>	   		regulator-boot-on;
>>	   		regulator-always-on;
>>	   		regulator-ramp-delay = <6250>;
>>	   	};
>>
>>There is no regulator-name property. From the current regulator framework,
>>if there is no regulator-name property, it will return -EINVAL. So,
>>I did this patch to use node name, if there is no regulator-name property.
>>
>>Regards,
>>Peng.
>>
>
>There are few boards in the kernel without the "regulator-name"
>properties in device tree files, so this is right solution.
>
>Please also update the comments in those files:
>- include/power/regulator.h
>- doc/device-tree-bindings/regulator/regulator.txt

Ok. I'll do this, but I prefer to make the documentation update a single patch.

Regards,
Peng.

>
>Best regards,
>-- 
>Przemyslaw Marczak
>Samsung R&D Institute Poland
>Samsung Electronics
>p.marczak at samsung.com

--