[U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver

[Marek Vasut <marex@denx.de>]

On Monday, August 10, 2015 at 04:00:47 PM, Simon Glass wrote:
> Hi Marek,

Hi Simon,

> On 10 August 2015 at 07:57, Marek Vasut <marex@denx.de> wrote:
> > On Monday, August 10, 2015 at 03:39:33 PM, Simon Glass wrote:
> >> Hi Marek,
> > 
> > Hi Simon,
> > 
> >> On 2 August 2015 at 17:52, Simon Glass <sjg@chromium.org> wrote:
> >> > On 2 August 2015 at 17:15, Marek Vasut <marex@denx.de> wrote:
> >> >> Add Kconfig entries for the simple-bus driver, both for U-Boot
> >> >> and for SPL. The simple-bus is enabled by default in U-Boot and
> >> >> disabled by default in SPL to preserve the original behavior.
> >> >> 
> >> >> Signed-off-by: Marek Vasut <marex@denx.de>
> >> >> Cc: Simon Glass <sjg@chromium.org>
> >> >> ---
> >> >> 
> >> >>  drivers/core/Kconfig  | 15 +++++++++++++++
> >> >>  drivers/core/Makefile |  5 ++---
> >> >>  2 files changed, 17 insertions(+), 3 deletions(-)
> >> > 
> >> > Acked-by: Simon Glass <sjg@chromium.org>
> >> 
> >> I can't apply this right now as it breaks most tegra boards. We use a
> >> hack at present where we #undef things in config_uncmd_spl.h and that
> >> isn't visible to the Makefiles.
> >> 
> >> Assuming that Tom applies Masahiro's Kconfig improvements for SPL we
> >> can do it then.
> > 
> > Agh, OK, thanks for the heads up.
> > 
> > I hope this makes it into 2015.10, otherwise the SPL support for SoCFPGA
> > will be completely useless.
> 
> One way or another we'll figure this out sooner rather than later.

I know :)

Best regards,
Marek Vasut