From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init
Date: Fri, 14 Aug 2015 03:43:53 +0200 [thread overview]
Message-ID: <201508140343.53126.marex@denx.de> (raw)
In-Reply-To: <55CD433A.8090601@st.com>
On Friday, August 14, 2015 at 03:24:10 AM, vikas wrote:
> Hi Marek,
Hi,
> On 08/13/2015 10:35 AM, Marek Vasut wrote:
> > On Thursday, August 13, 2015 at 05:50:18 PM, vikasm wrote:
> >> Hi Marek,
> >
> > Hi!
> >
> >> On 08/12/2015 07:07 PM, Marek Vasut wrote:
> >>> On Thursday, July 16, 2015 at 04:27:29 AM, Vikas Manocha wrote:
> >>>
> >>> Commit message is missing.
> >>
> >> Actually subject of the mail was sufficient, this patch just moves the
> >> register configuration in init.
> >
> > NAK, fix the commit message.
> >
> >>>> Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
> >>>> ---
> >>>>
> >>>> Changes in v2: Rebased to master
> >>>>
> >>>> drivers/spi/cadence_qspi_apb.c | 9 ++-------
> >>>> 1 file changed, 2 insertions(+), 7 deletions(-)
> >>>>
> >>>> diff --git a/drivers/spi/cadence_qspi_apb.c
> >>>> b/drivers/spi/cadence_qspi_apb.c index d053407..1ae7edf 100644
> >>>> --- a/drivers/spi/cadence_qspi_apb.c
> >>>> +++ b/drivers/spi/cadence_qspi_apb.c
> >>>> @@ -534,6 +534,8 @@ void cadence_qspi_apb_controller_init(struct
> >>>> cadence_spi_platdata *plat)
> >>>>
> >>>> /* Indirect mode configurations */
> >>>> writel((plat->sram_size/2), plat->regbase +
> >>>> CQSPI_REG_SRAMPARTITION);
> >>>>
> >>>> + writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK),
> >>>
> >>> You can drop the parenthesis around the first argument, they're
> >>> useless. Also, the indent of the second arg should be fixed, I believe
> >>> checkpatch might even complain about it.
>
> ok for first comment about parenthesis but indent of second arg seems ok.
> yes, checkpatch warning was "CHECK: Alignment should match open
> parenthesis" but i ignored it. To respect 80 column, i had to move second
> arg in another line. Am i missing something ?
Just don't ignore the checkpatch warnings next time please ;-)
Best regards,
Marek Vasut
next prev parent reply other threads:[~2015-08-14 1:43 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 2:27 [U-Boot] [v2 0/6] spi: cadence_qspi: optimize & fix indirect rd-writes Vikas Manocha
2015-07-16 2:27 ` [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init Vikas Manocha
2015-08-13 2:07 ` Marek Vasut
2015-08-13 15:50 ` vikasm
2015-08-13 17:35 ` Marek Vasut
2015-08-13 19:05 ` vikasm
2015-08-14 1:24 ` vikas
2015-08-14 1:43 ` Marek Vasut [this message]
2015-08-14 1:44 ` vikas
2015-08-14 1:55 ` Marek Vasut
2015-07-16 2:27 ` [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read Vikas Manocha
2015-08-13 2:09 ` Marek Vasut
2015-08-13 16:27 ` vikasm
2015-08-13 17:33 ` Marek Vasut
2015-08-13 19:49 ` vikas
2015-08-13 20:35 ` Marek Vasut
2015-08-13 21:04 ` vikas
2015-08-13 22:47 ` Marek Vasut
2015-08-13 23:18 ` vikas
2015-08-13 23:46 ` Marek Vasut
2015-08-14 0:26 ` vikas
2015-08-14 0:44 ` Marek Vasut
2015-08-14 0:46 ` vikas
2015-08-14 1:03 ` Marek Vasut
2015-08-14 1:05 ` vikas
2015-08-14 3:54 ` Marek Vasut
2015-07-16 2:27 ` [U-Boot] [v2 3/6] spi: cadence_qspi: remove sram polling from flash write Vikas Manocha
2015-08-13 2:11 ` Marek Vasut
2015-08-13 16:30 ` vikasm
2015-08-13 17:34 ` Marek Vasut
2015-07-16 2:27 ` [U-Boot] [v2 4/6] spi: cadence_qspi: fix indirect read/write start address Vikas Manocha
2015-07-16 2:27 ` [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer " Vikas Manocha
2015-08-13 2:15 ` Marek Vasut
2015-08-13 16:42 ` vikasm
2015-08-13 21:36 ` vikas
2015-08-13 22:48 ` Marek Vasut
2015-08-14 0:37 ` vikas
2015-08-14 1:04 ` Marek Vasut
2015-08-14 1:39 ` vikas
2015-08-14 1:56 ` Marek Vasut
2015-08-14 2:14 ` Vikas MANOCHA
2015-07-16 2:27 ` [U-Boot] [v2 6/6] spi: cadence_qspi: get fifo width from device tree Vikas Manocha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201508140343.53126.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox