[U-Boot] [PATCH 6/6] sf: Update spi_flash_cmd_wait_ready

[Marek Vasut <marex@denx.de>]

On Sunday, August 16, 2015 at 10:43:49 AM, Jagan Teki wrote:
> Current flash wait_ready logic is not modular to add new
> register status check, hence few of the logic is used from
> Linux spi-nor framework.
> 
> Below are the sf speed runs with 'sf update' on whole flash, 16MiB.
> 
> => sf update 0x100 0x0 0x1000000
> device 0 whole chip
> 16777216 bytes written, 0 bytes skipped in 61.784s, speed 279620 B/s
> 
> => sf update 0x100 0x0 0x1000000
> device 0 whole chip
> 16777216 bytes written, 0 bytes skipped in 61.276s, speed 284359 B/s
> 
> Signed-off-by: Jagan Teki <jteki@openedev.com>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Tom Warren <twarren@nvidia.com>
> Cc: Bin Meng <bmeng.cn@gmail.com>
> Cc: Tom Rini <trini@konsulko.com>
> Tested-by: Jagan Teki <jteki@openedev.com>
> ---

Please split this into two patches, one which makes the code modular
and next one which adds new features (the FSR reading or whatever).

Best regards,
Marek Vasut