From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Mon, 17 Aug 2015 14:25:23 +0800 Subject: [U-Boot] [PATCH 7/9] imx: mx6: ddr init MMDC according to ddr_type In-Reply-To: <55D18B2F.7040105@denx.de> References: <1439782166-9211-1-git-send-email-Peng.Fan@freescale.com> <1439782166-9211-8-git-send-email-Peng.Fan@freescale.com> <55D18521.70301@denx.de> <20150817055952.GA27414@shlinux2> <55D18B2F.7040105@denx.de> Message-ID: <20150817062520.GA1835@shlinux2> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Aug 17, 2015 at 09:20:15AM +0200, Stefan Roese wrote: >On 17.08.2015 07:59, Peng Fan wrote: >>On Mon, Aug 17, 2015 at 08:54:25AM +0200, Stefan Roese wrote: >>>On 17.08.2015 05:29, Peng Fan wrote: >>>>To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg >>>>to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper. >>>>The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg >>>>when ddr_type is for DDR3. Later we can use ddr_type to initialize >>>>MMDC for LPDDR2. >>>>Initialize ddr_type for different boards which enable SPL. >>>> >>>>Signed-off-by: Peng Fan >>>>Cc: Stefano Babic >>>>Cc: Tim Harvey >>>>Cc: Stefan Roese >>>>Cc: Fabio Estevam >>>>--- >>>> arch/arm/cpu/armv7/mx6/ddr.c | 14 +++++++++++++- >>>> arch/arm/include/asm/arch-mx6/mx6-ddr.h | 2 +- >>>> board/barco/platinum/spl_picon.c | 1 + >>>> board/barco/platinum/spl_titanium.c | 1 + >>>> board/freescale/mx6sabresd/mx6sabresd.c | 1 + >>>> board/freescale/mx6sxsabresd/mx6sxsabresd.c | 1 + >>>> board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 1 + >>>> board/gateworks/gw_ventana/gw_ventana_spl.c | 1 + >>>> board/solidrun/mx6cuboxi/mx6cuboxi.c | 1 + >>>> 9 files changed, 21 insertions(+), 2 deletions(-) >>>> >>>>diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c >>>>index 3f23abf..a6bef60 100644 >>>>--- a/arch/arm/cpu/armv7/mx6/ddr.c >>>>+++ b/arch/arm/cpu/armv7/mx6/ddr.c >>>>@@ -348,7 +348,7 @@ void mx6sdl_dram_iocfg(unsigned width, >>>> mmdc1->entry = value; \ >>>> } while (0) >>>> >>>>-void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, >>>>+void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, >>>> const struct mx6_mmdc_calibration *calib, >>>> const struct mx6_ddr3_cfg *ddr3_cfg) >>>> { >>>>@@ -655,3 +655,15 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, >>>> /* wait for auto-ZQ calibration to complete */ >>>> mdelay(1); >>>> } >>>>+ >>>>+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, >>>>+ const struct mx6_mmdc_calibration *calib, >>>>+ const void *ddr_cfg) >>>>+{ >>>>+ if (sysinfo->ddr_type == 0) { >>>>+ mx6_ddr3_cfg(sysinfo, calib, ddr_cfg); >>>>+ } else { >>>>+ puts("Unsupported ddr type\n"); >>>>+ hang(); >>>>+ } >>>>+} >>>>diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h >>>>index 49fc9e5..e3ba140 100644 >>>>--- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h >>>>+++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h >>>>@@ -439,7 +439,7 @@ void mx6sl_dram_iocfg(unsigned width, >>>> /* configure mx6 mmdc registers */ >>>> void mx6_dram_cfg(const struct mx6_ddr_sysinfo *, >>>> const struct mx6_mmdc_calibration *, >>>>- const struct mx6_ddr3_cfg *); >>>>+ const void *); >>>> >>>> #endif /* CONFIG_SPL_BUILD */ >>>> >>>>diff --git a/board/barco/platinum/spl_picon.c b/board/barco/platinum/spl_picon.c >>>>index f421c21..aac0948 100644 >>>>--- a/board/barco/platinum/spl_picon.c >>>>+++ b/board/barco/platinum/spl_picon.c >>>>@@ -137,6 +137,7 @@ static void spl_dram_init(int width) >>>> .bi_on = 1, /* Bank interleaving enabled */ >>>> .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ >>>> .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ >>>>+ .ddr_type = 0, /* DDR3 */ >>> >> >>Seems my patches are not posted to uboot mailist successfully. > >The list was stuck over the weekend. Please wait a bit. The messages >start to arrive now. Seems my patch are dropped, not sure :( > >>>Perhaps adding an enum here would be better. You could remove the >>>comment then as well. >>> >>>Other than this: >>> >>>Reviewed-by: Stefan Roese >> >>Will add your tag, and repost patch set to uboot mailist. > >And please add the enum as well. How about using macros? saying "#define MX6_DDR3 0" and "#define MX6_LPDDR2 1"? > >Thanks, >Stefan > Regards, Peng. --