[U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel

[Marek Vasut <marex@denx.de>]

On Friday, August 21, 2015 at 03:25:00 AM, Chin Liang See wrote:
> On Fri, 2015-08-21 at 03:07 +0200, marex at denx.de wrote:
> > On Friday, August 21, 2015 at 02:54:00 AM, Chin Liang See wrote:
> > > Hi guys,
> > 
> > Hi,

Hi,

> > > Any comment or ack for this patch?
> > 
> > Please don't expect that the reviewers/maintainers have nothing else on
> > their plate but to review your patch. Besides, this change is really low
> > priority one, since thus far the SD/MMC works fine on all of the SoCFPGA
> > boards to my knowledge.
> > 
> > Also, I thought we agreed to wait for Simon to comment on this patch.
> > You don't have to repost a patch before the discussion settles a bit.
> > This doesn't help, it only puts burden on the receiving side, chill :)
> > Let alone the fact that this code should be part of the DWMMC core, as
> > it is not socfpga specific.
> > 
> > What I would be really interested in is a proper description of the
> > calibration algorithm. What is the goal and how do you achieve it ?
> 
> Actually I am probing the efforts needed for this patch before moving to
> next one. While for the SDMMC calibration, it is not needed if the SD
> card is routed near to the chip. We have incident where SD access failed
> as they routed few inches away.

Does the calibration really help or is that a problem with the board ?
It'd be nice if you put effort into this patch to get it done correctly :)

> With that, let wait for Simon and I shall move on next item.

If you're waiting for Simon, it might be a good idea to actually CC him :-)

Best regards,
Marek Vasut