[U-Boot] [PATCH v5 1/5] spi: cadence_qspi: move trigger base configuration in init

[Marek Vasut <marex@denx.de>]

On Thursday, August 27, 2015 at 05:46:12 PM, Vikas MANOCHA wrote:
> Hi,
> 
> > -----Original Message-----
> > From: Marek Vasut [mailto:marex at denx.de]
> > Sent: Thursday, August 27, 2015 1:36 AM
> > To: Vikas MANOCHA
> > Cc: u-boot at lists.denx.de; sr at denx.de; grmoore at opensource.altera.com;
> > jteki at openedev.com
> > Subject: Re: [PATCH v5 1/5] spi: cadence_qspi: move trigger base
> > configuration in init
> > 
> > On Thursday, August 27, 2015 at 12:44:26 AM, Vikas Manocha wrote:
> > > No need to configure indirect trigger address for every read/write.
> > > 
> > > Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
> > > ---
> > > 
> > > Changes in v5: fixed type cast compilation warnings.
> > > Changes in v4: removed extra type casts.
> > > Changes in v3: added commit message & removed extra bracket.
> > > Changes in v2: Rebased to master
> > > 
> > >  drivers/spi/cadence_qspi_apb.c |    9 ++-------
> > >  1 file changed, 2 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/drivers/spi/cadence_qspi_apb.c
> > > b/drivers/spi/cadence_qspi_apb.c index d053407..d377ad1 100644
> > > --- a/drivers/spi/cadence_qspi_apb.c
> > > +++ b/drivers/spi/cadence_qspi_apb.c
> > > @@ -534,6 +534,8 @@ void cadence_qspi_apb_controller_init(struct
> > > cadence_spi_platdata *plat)
> > > 
> > >  	/* Indirect mode configurations */
> > >  	writel((plat->sram_size/2), plat->regbase +
> > > 
> > > CQSPI_REG_SRAMPARTITION);
> > > +	writel((u32)plat->ahbbase &
> > 
> > CQSPI_INDIRECTTRIGGER_ADDR_MASK,
> > 
> > Why can't you just drop this masking and the cast ?
> 
> Masking is dropped in another patch in same series.

So you're adding broken code first only to fix it later ? I don't like this.

> Casting is required as ahbbase is a pointer.

ahbbase is used as u32 value all around the place, so just fix it to u32
and drop the cast.

Best regards,
Marek Vasut