[U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback

[Peng Fan <b51431@freescale.com>]

Hi Stephen,
On Fri, Aug 28, 2015 at 08:05:36AM +0800, Peng Fan wrote:
>Hi Stephen,
>On Thu, Aug 27, 2015 at 10:06:14AM -0600, Stephen Warren wrote:
>>On 08/27/2015 05:08 AM, Marek Vasut wrote:
>>>On Thursday, August 27, 2015 at 01:00:50 PM, Peng Fan wrote:
>>>>Implement endpoint dequeue callback function.
>>>>
>>>>Without this function, uboot will hang when executing fastboot comamnd.
>>>>See following flow:
>>>>"fastboot_tx_write_str->fastboot_tx_write->usb_ep_dequeue->ep->ops->dequeue
>>>>" without implement ci_udc dequeue function, ep->ops->dequeue is NULL, then
>>>>uboot will hang.
>>>>
>>>>Tested on mx6qsabresd board with fastboot enabled.
>>
>>>>diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c
>>
>>>>+static int ci_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
>>
>>>>+	if (ci_req->req.status == -EINPROGRESS) {
>>>>+		ci_req->req.status = -ECONNRESET;
>>>>+		if (ci_req->req.complete)
>>>>+			ci_req->req.complete(_ep, _req);
>>>>+	}
>>
>>Is there no need to reprogram the HW to abort the transfer?
>
>I checked linux udc driver drivers/usb/gadget/udc/fsl_qe_udc.c
>qe_ep_dequeue->done->usb_gadget_giveback_request->"req->complete(ep, req)"
>I did not see code to reprogram the HW to abort the transfer.

Do you have further comments?
I checked other gadget drivers in drivers/usb/gadget/, I did not see
drivers that reprogram the HW to abort the transfer. For now, I do not
think out a scenario to reprogram the HW to abort the transfer

Regards,
Peng.
>
>Regards,
>Peng.
>-- 

--