[U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger

[Siarhei Siamashka <siarhei.siamashka@gmail.com>]

On Mon, 31 Aug 2015 17:01:42 +0200
Hans de Goede <hdegoede@redhat.com> wrote:

> Hi,
> 
> On 31-08-15 16:46, Maxime Ripard wrote:
> > When using fastboot and flashing a larger image such as the main partition
> > of a system, the current 32MB limit for the buffer is quite small.
> >
> > Increase it to something that looks decent for such a use case.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> >   include/configs/sunxi-common.h | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> > index 1abf73c31179..710521c617f5 100644
> > --- a/include/configs/sunxi-common.h
> > +++ b/include/configs/sunxi-common.h
> > @@ -363,7 +363,7 @@ extern int soft_i2c_gpio_scl;
> >   #ifdef CONFIG_USB_FUNCTION_FASTBOOT
> >   #define CONFIG_CMD_FASTBOOT
> >   #define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
> > -#define CONFIG_FASTBOOT_BUF_SIZE	0x2000000
> > +#define CONFIG_FASTBOOT_BUF_SIZE	(256 << 20)
> 
> Hmm, where / how does this get allocated? On some boards we only
> have 256M RAM, so this is not going to fit ... also if this comes
> out of the heap, the current heap is only 4M and the wip sunxi
> nand patches boost it to 64 (I still need to verify this works on
> a 256M board, this may need a tweak to bootm_size to make sure
> the bootm code does not try to put the kernel where it conflicts
> with the heap ...).

Can this be eventually improved to become a dynamic limit (depending
on the RAM size available on the device) instead of the "one size fits
all" hardcoded define approach?

-- 
Best regards,
Siarhei Siamashka