[U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers

[Tom Rini <trini@konsulko.com>]

On Thu, Sep 03, 2015 at 02:21:39PM +0200, Lukasz Majewski wrote:

> It is very common that FAT code is using following pattern:
> if (disk_{read|write}() < 0)
>         return -1;
> 
> Up till now the above code was dead, since disk_{read|write) could only
> return value >= 0.
> As a result some errors from medium layer (i.e. eMMC/SD) were not caught.
> 
> The above behavior was caused by block_{read|write|erase} declared at
> struct block_dev_desc (@part.h). It returns unsigned long, where 0
> indicates error and > 0 indicates that medium operation was correct.
> 
> This patch as error regards 0 returned from block_{read|write|erase}
> when nr_blocks is grater than zero. Read/Write operation with nr_blocks=0
> should return 0 and hence is not considered as an error.
> 
> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
> 
> Test HW: Odroid XU3 - Exynos 5433

Can you pick up Stephen's FAT replacement series and see if it also
fixes this problem?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150903/2f4fe1e7/attachment.sig>