From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller
Date: Thu, 3 Sep 2015 23:41:04 +0200 [thread overview]
Message-ID: <20150903214104.GE31584@lukather> (raw)
In-Reply-To: <55E56952.4010502@redhat.com>
Hi Hans,
On Tue, Sep 01, 2015 at 11:01:06AM +0200, Hans de Goede wrote:
> Hi,
>
> On 31-08-15 16:46, Maxime Ripard wrote:
> >The A13-Olinuxino has a mini-USB connector that can be used to power up
> >the board and as an OTG connector.
> >
> >Since we have already some USB host-only ports right beside this one,
> >enable it in gadget mode
> >
> >Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> >---
> > configs/A13-OLinuXino_defconfig | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> >diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
> >index 4b4337223ca5..70aa194b91c4 100644
> >--- a/configs/A13-OLinuXino_defconfig
> >+++ b/configs/A13-OLinuXino_defconfig
> >@@ -3,6 +3,7 @@ CONFIG_ARCH_SUNXI=y
> > CONFIG_MACH_SUN5I=y
> > CONFIG_DRAM_CLK=408
> > CONFIG_DRAM_EMR1=0
> >+CONFIG_USB0_VBUS_DET="PG1"
> > CONFIG_USB1_VBUS_PIN="PG11"
> > CONFIG_AXP_GPIO=y
> > # CONFIG_VIDEO_HDMI is not set
> >@@ -11,6 +12,7 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
> > CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
> > CONFIG_VIDEO_LCD_POWER="AXP0-0"
> > CONFIG_VIDEO_LCD_BL_PWM="PB2"
> >+CONFIG_USB_MUSB_SUNXI=y
> > CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
> > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > CONFIG_SPL=y
>
> The CONFIG_xxx defines for using MUSB in either host or gadget mode have
> changed in v2015.10, looks like you need to rebase this series and fix
> this.
This was based on 2015.10-rc2. I enabled it as a gadget through
menuconfig. What is the policy on using gadget vs host? I guess it
would make more sense to enable all the OTG connectors to gadget, but
maybe that's just me.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150903/f3d60092/attachment.sig>
next prev parent reply other threads:[~2015-09-03 21:41 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-31 14:46 [U-Boot] [PATCH 00/13] Implement fastboot over NAND Maxime Ripard
2015-08-31 14:46 ` [U-Boot] [PATCH 01/13] mtd: uboot: Add meaningful error message Maxime Ripard
2015-09-04 17:20 ` Tom Rini
2015-08-31 14:46 ` [U-Boot] [PATCH 02/13] sparse: Move main header parsing to a function of its own Maxime Ripard
2015-09-04 17:20 ` Tom Rini
2015-08-31 14:46 ` [U-Boot] [PATCH 03/13] sparse: Refactor chunk parsing function Maxime Ripard
2015-09-04 17:20 ` Tom Rini
2015-08-31 14:46 ` [U-Boot] [PATCH 04/13] sparse: Simplify multiple logic Maxime Ripard
2015-09-04 17:20 ` Tom Rini
2015-09-06 11:27 ` Maxime Ripard
2015-09-06 19:28 ` Tom Rini
2015-09-13 17:08 ` Maxime Ripard
2015-08-31 14:46 ` [U-Boot] [PATCH 05/13] sparse: Implement storage abstraction Maxime Ripard
2015-09-04 17:20 ` Tom Rini
2015-08-31 14:46 ` [U-Boot] [PATCH 06/13] fastboot: Move fastboot response functions to fastboot core Maxime Ripard
2015-09-04 17:20 ` Tom Rini
2015-09-06 16:11 ` Maxime Ripard
2015-09-06 19:43 ` Tom Rini
2015-08-31 14:46 ` [U-Boot] [PATCH 07/13] fastboot: Implement NAND backend Maxime Ripard
2015-09-04 17:20 ` Tom Rini
2015-09-06 15:57 ` Maxime Ripard
2015-09-06 19:41 ` Tom Rini
2015-09-10 7:41 ` Boris Brezillon
2015-08-31 14:46 ` [U-Boot] [PATCH 08/13] fastboot: nand: Add pre erase and write hooks Maxime Ripard
2015-09-04 17:20 ` Tom Rini
2015-08-31 14:46 ` [U-Boot] [PATCH 09/13] sparse: Rename the file and header Maxime Ripard
2015-09-04 17:21 ` Tom Rini
2015-09-06 11:28 ` Maxime Ripard
2015-08-31 14:46 ` [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger Maxime Ripard
2015-08-31 15:01 ` Hans de Goede
2015-08-31 19:17 ` Rob Herring
2015-09-01 7:14 ` Maxime Ripard
2015-09-08 13:00 ` Rob Herring
2015-09-08 15:44 ` Maxime Ripard
2015-09-01 7:05 ` Maxime Ripard
2015-09-01 8:59 ` Hans de Goede
2015-09-03 21:43 ` Maxime Ripard
2015-09-01 8:02 ` Siarhei Siamashka
2015-09-01 7:22 ` Ian Campbell
2015-09-01 7:44 ` Siarhei Siamashka
2015-09-01 8:11 ` Maxime Ripard
2015-09-04 17:02 ` Tom Rini
2015-09-06 11:23 ` Maxime Ripard
2015-09-01 7:57 ` Maxime Ripard
2015-09-04 16:59 ` Tom Rini
2015-09-06 11:22 ` Maxime Ripard
2015-09-07 9:07 ` Ian Campbell
2015-08-31 14:46 ` [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image Maxime Ripard
2015-09-01 7:08 ` Ian Campbell
2015-09-01 7:15 ` Maxime Ripard
2015-09-01 9:00 ` Paul Kocialkowski
2015-09-01 10:46 ` Ian Campbell
2015-09-01 11:29 ` Maxime Ripard
2015-09-01 13:54 ` Ian Campbell
2015-09-01 13:59 ` Paul Kocialkowski
2015-09-01 11:28 ` Maxime Ripard
2015-09-08 13:12 ` Rob Herring
2015-08-31 14:46 ` [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller Maxime Ripard
2015-09-01 9:01 ` Hans de Goede
2015-09-03 21:41 ` Maxime Ripard [this message]
2015-09-10 18:47 ` Hans de Goede
2015-09-13 17:13 ` Maxime Ripard
2015-09-13 17:38 ` Hans de Goede
2015-09-14 21:19 ` Maxime Ripard
2015-08-31 14:46 ` [U-Boot] [PATCH 13/13] sunxi: cubietruck: " Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150903214104.GE31584@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox