From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range
Date: Mon, 7 Sep 2015 02:53:31 +0200 [thread overview]
Message-ID: <201509070253.31192.marex@denx.de> (raw)
In-Reply-To: <55ECD8DC.9090305@wytron.com.tw>
On Monday, September 07, 2015 at 02:22:52 AM, Thomas Chou wrote:
> Hi Marek,
Hi!
> On 09/06/2015 11:23 PM, Marek Vasut wrote:
> > Uh oh, is this copying something the U-Boot SPL cannot do for us ?
>
> Though U-Boot SPL can do, it will need 64KB onchip memory. While the
> EPCS controller needs only 512B onchip memory. So we didn't ever
> consider SPL for nios2.
Where did that 64KB figure come from ? :O
I assume the simple loader is just a copy loop, huh ? And you synthesise
a small RAM or ROM into the FPGA and point NIOS to boot from that, right?
What about U-Boot TPL, can that cook the loader ? (yes, I'd like to be as
independent of the external code as possible).
Best regards,
Marek Vasut
next prev parent reply other threads:[~2015-09-07 0:53 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-04 3:15 [U-Boot] [PATCH 0/5] nios2: add device tree control of U-Boot Thomas Chou
2015-09-04 3:15 ` [U-Boot] [PATCH 1/5] nios2: permit " Thomas Chou
2015-09-04 4:08 ` Simon Glass
2015-09-04 3:15 ` [U-Boot] [PATCH 2/5] nios2: enable " Thomas Chou
2015-09-04 4:09 ` Simon Glass
2015-09-04 3:15 ` [U-Boot] [PATCH 3/5] nios2: revert _end symbol in link script Thomas Chou
2015-09-04 4:09 ` Simon Glass
2015-09-04 3:15 ` [U-Boot] [PATCH 4/5] nios2: initialize stack earlier in startup Thomas Chou
2015-09-04 4:09 ` Simon Glass
2015-09-04 3:15 ` [U-Boot] [PATCH 5/5] nios2: relocate dtb for separated device tree Thomas Chou
2015-09-04 4:09 ` Simon Glass
2015-09-04 4:47 ` Thomas Chou
2015-09-04 12:22 ` [U-Boot] [PATCH v2 0/8] nios2: add device tree control of U-Boot Thomas Chou
2015-09-04 12:22 ` [U-Boot] [PATCH v2 1/8] nios2: permit " Thomas Chou
2015-09-04 13:54 ` Marek Vasut
2015-09-04 12:22 ` [U-Boot] [PATCH v2 2/8] nios2: move altera_pio_init to board_early_init_r Thomas Chou
2015-09-04 13:55 ` Marek Vasut
2015-09-05 0:16 ` Thomas Chou
2015-09-05 0:54 ` Marek Vasut
2015-09-04 12:22 ` [U-Boot] [PATCH v2 3/8] nios2: BSS should be cleared only after board_init_f Thomas Chou
2015-09-04 13:56 ` Marek Vasut
2015-09-04 12:22 ` [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range Thomas Chou
2015-09-04 13:59 ` Marek Vasut
2015-09-05 2:17 ` Thomas Chou
2015-09-05 12:50 ` Marek Vasut
2015-09-06 11:28 ` Thomas Chou
2015-09-06 12:29 ` Marek Vasut
2015-09-06 13:12 ` Thomas Chou
2015-09-06 13:18 ` Marek Vasut
2015-09-06 13:49 ` Thomas Chou
2015-09-06 15:23 ` Marek Vasut
2015-09-07 0:22 ` Thomas Chou
2015-09-07 0:53 ` Marek Vasut [this message]
2015-09-07 1:47 ` Thomas Chou
2015-09-07 9:31 ` Marek Vasut
2015-09-04 12:22 ` [U-Boot] [PATCH v2 5/8] nios2: remove gp assignments in link script Thomas Chou
2015-09-04 14:00 ` Marek Vasut
2015-09-05 2:31 ` [U-Boot] [PATCH v3 " Thomas Chou
2015-09-04 12:22 ` [U-Boot] [PATCH v2 6/8] nios2: define _end " Thomas Chou
2015-09-04 14:01 ` Marek Vasut
2015-09-05 2:41 ` [U-Boot] [PATCH v3 " Thomas Chou
2015-09-05 12:49 ` Marek Vasut
2015-09-04 14:09 ` [U-Boot] [PATCH v2 " Simon Glass
2015-09-04 12:22 ` [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command Thomas Chou
2015-09-04 14:01 ` Marek Vasut
2015-09-05 2:54 ` Thomas Chou
2015-09-05 12:51 ` Marek Vasut
2015-09-06 11:31 ` Thomas Chou
2015-09-06 13:20 ` Thomas Chou
2015-09-06 14:27 ` Marek Vasut
2015-09-08 3:55 ` Simon Glass
2015-09-08 10:10 ` Marek Vasut
2015-09-04 14:10 ` Simon Glass
2015-09-09 4:26 ` Thomas Chou
2015-09-04 12:22 ` [U-Boot] [PATCH v2 8/8] nios2: enable device tree control of U-Boot Thomas Chou
2015-09-04 14:03 ` Marek Vasut
2015-09-05 3:36 ` Thomas Chou
2015-09-05 12:52 ` Marek Vasut
2015-09-04 14:04 ` [U-Boot] [PATCH v2 0/8] nios2: add " Marek Vasut
2015-09-05 3:20 ` Thomas Chou
2015-09-05 12:53 ` Marek Vasut
2015-09-07 1:36 ` Ley Foon Tan
2015-09-07 1:03 ` [U-Boot] [PATCH v4 0/7] " Thomas Chou
2015-09-07 1:03 ` [U-Boot] [PATCH v4 1/7] nios2: permit " Thomas Chou
2015-09-07 2:24 ` Thomas Chou
2015-09-07 1:03 ` [U-Boot] [PATCH v4 2/7] nios2: move altera_pio_init to board_early_init_r Thomas Chou
2015-09-07 2:24 ` Thomas Chou
2015-09-07 1:03 ` [U-Boot] [PATCH v4 3/7] nios2: BSS should be cleared only after board_init_f Thomas Chou
2015-09-07 2:25 ` Thomas Chou
2015-09-07 1:03 ` [U-Boot] [PATCH v4 4/7] nios2: enlarge the code relocation range Thomas Chou
2015-09-07 2:26 ` Thomas Chou
2015-09-07 1:03 ` [U-Boot] [PATCH v4 5/7] nios2: remove gp assignments in link script Thomas Chou
2015-09-07 2:26 ` Thomas Chou
2015-09-07 1:03 ` [U-Boot] [PATCH v4 6/7] nios2: define _end " Thomas Chou
2015-09-07 2:27 ` Thomas Chou
2015-09-07 1:03 ` [U-Boot] [PATCH v4 7/7] nios2: enable device tree control of U-Boot Thomas Chou
2015-09-07 2:28 ` Thomas Chou
2015-09-07 9:29 ` [U-Boot] [PATCH v4 0/7] nios2: add " Marek Vasut
2015-09-07 14:20 ` Thomas Chou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201509070253.31192.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox