From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Tue, 8 Sep 2015 14:28:59 +0200
Subject: [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration
	is run when sclk change
In-Reply-To: <CAD6G_RSz0_FT8EcaU0mV+sA2HLxttNEdS+=bMw9cROZz5pk6Gw@mail.gmail.com>
References: <1441675069-2498-1-git-send-email-clsee@altera.com>
 <201509081308.02624.marex@denx.de>
 <CAD6G_RSz0_FT8EcaU0mV+sA2HLxttNEdS+=bMw9cROZz5pk6Gw@mail.gmail.com>
Message-ID: <201509081428.59809.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tuesday, September 08, 2015 at 02:25:54 PM, Jagan Teki wrote:
> On 8 September 2015 at 16:38, Marek Vasut <marex@denx.de> wrote:
> > On Tuesday, September 08, 2015 at 03:17:49 AM, Chin Liang See wrote:
> >> Ensuring spi_calibration is run when there is a change of sclk
> >> frequency. This will ensure the qspi flash access works for high
> >> sclk frequency
> >> 
> >> Signed-off-by: Chin Liang See <clsee@altera.com>
> >> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> >> Cc: Dinh Nguyen <dinh.linux@gmail.com>
> >> Cc: Marek Vasut <marex@denx.de>
> >> Cc: Stefan Roese <sr@denx.de>
> >> Cc: Vikas Manocha <vikas.manocha@st.com>
> >> Cc: Jagannadh Teki <jteki@openedev.com>
> >> Cc: Pavel Machek <pavel@denx.de>
> > 
> > Acked-by: Marek Vasut <marex@denx.de>
> > 
> > Jagan, please apply for -next or I'll pick it up. Which do you prefer ?
> 
> You can pick, no issues. once 2/4, 3/4 ready.

OK, will do.

Best regards,
Marek Vasut